Installation
Typical Installations
Fig. 1 shows a typical hose reel installation. These dispense valves can also be installed on a console, as shown in Fig. 2.
CAUTION
Do not use this dispense valve on non-Graco consoles. Such use could result in the trigger becoming inadvertently pressed while the dis- pense valve is stowed.
The typical installation shown in Fig. 1 is only a guide. The components shown are typical; however, it is not a complete system design. Contact your Graco distribu- tor for assistance in designing a system to suit your particular needs.
CAUTION
This dispense valve is not designed for in-line installation. Do not install with a shut-off valve on the outlet side of the meter. Such installation could result in damage to the meter housing cover.
H
Fig. 1
J
L
M
K
N
06174B
Mounting Bracket
Mounting bracket 196471 is available for resting a PM5 dispense valve on a console. See Fig. 2.
CAUTION
Do not obstruct the trigger of this dispense valve, and do not set the unit down resting on its trigger, or it might not stop dispensing.
mounting bracket 196471
KEY DESCRIPTION
HThermal relief kit (required) Part No. 235998 Install downstream from pump.
JFluid
L Hose reel fluid inlet hose M Hose reel
NPM5 electronic metered dispense valve
4 309377
Fig. 2 | TI0334 |
|