Videk 2030 manual Prefix Settings, Suffix Settings, Prefix Comma Prefix Space

6.1 - Prefix Settings

If you scan the following codes, you will lose any unsaved settings. Make sure to save settings on your reader before scanning the prefix codes. If you scan more than one prefix you will receive each scanned prefix in your scanned data; (i.e., if you scan comma prefix twice, you will get two comma prefixes). Scan the following codes to set appropriate prefix:

Prefix - Comma Prefix - Space Prefix - Tab (USB Mode)

Prefix - Tab	Prefix - Erase	Prefix - Carriage Return Line Feed
	This code will	Only Use with
	erase all prefix	Serial Applications
	data.

Note: If you require a special configuration, please contact Videk at (585) 292-6210 or (800) 24-VIDEK.

6.2 - Suffix Settings

If you scan the following codes, you may lose your current settings. Make sure to save settings on your reader before scanning the Suffix codes. If you scan more than one suffix you will receive each scanned suffix in your scanned data; (i.e., if you scan comma suffix twice, you will get two comma suffixes). Scan the following codes to set appropriate suffix:

Suffix - Carriage Return	Suffix - Comma	Suffix - Line Feed
Only Use with		Only Use with
Serial Applications		Serial Applications

Suffix - Carriage Return Line Feed	Suffix - Space	Suffix - Enter
Only Use with		Only Use with
Serial Applications		USB or Keyboard
		Mode

Save Settings K11020 VisionSensor™ 2030 User Manual, Rev. E, Software ver. 3.1.1000, August 3, 2007 - 50