SSV 05/R
2.4. Connecting the compressed-air supply
Check compressed-air piping for correct installa- tion and assembly.
Check fittings, length and quality of the hose con- nections for agreement with requirements.
Check all compressed-air lines for leakages.
You need a compressed-air supply with 5 - 6 bar system (72.52-87.02 PSI) overpressure. The air should be free from oil and water, if possible.
Connect the compressed-air hose, which is part of the supply, to the injector tube and to the con- trol and maintenance unit. To this end, the com- pressed-air hose is firmly pressed into the con- necting sockets.
Connect the control and maintenance unit to the compressed-air supply (max. input pressure 10 bar (145.03 PSI) system overpressure).
Set the pressure on the pressure reducer at 5 - 6 bar (72.52-87.02 PSI).
Maximum input pressure 10 bar (145.03 PSI) (system overpressure).
Maximum output pressure 6 bar (87.02 PSI).
Installation instructions 17
