Sterling operating instructions SSV 05/R Electrical connection

Page 19

SSV 05/R

2.5. Electrical connection

Observe the regulations of the local electricity board.

The operating voltage is 230 V, AC, PE, 50/60 Hz.

Special voltages available on request.

The connected load is approx. 15 W (0.02 hp).

The connection takes place by means of a mains connector.

Aseparate protection of the socket is not necessary. Connect the plug of the probe cable to the control unit. Plug the mains connector into a corresponding socket.

SM4-605

Installation instructions 18

Image 19

Contents Sterling Material Processing Operating Instructions Single Conveyor Unit SSV 05/RSSV 05/R Sterling Material Processing Technical serviceEdition 08/99 SSV 05/R Parts and Service Department Table of contents SSV 05/R Technical data Safety instructions Safety instructionsSSV 05/R SSV 05/R Explanations and information SSV 05/R For your safety SSV 05/R SSV 05/R SSV 05/R For the safety of the units Installation instructions SSV 05/R General information SSV 05/R Installing the conveyor hopper SSV 05/R Installing the control and maintenance unit SSV 05/R Connecting the compressed-air supply SSV 05/R Electrical connection Functional description SSV 05/R Method of functioning Control and maintenance unitSet-up Filling level too high Basic setting of the filling level in the conveyor hopperSSV 05/R Preparations Filling level too lowSet-up Maintenance SSV 05/R SSV 05/R Maintenance intervals Disassembly SSV 05/R Cleaning/replacing the filter cartridgeAdjusting the level probe SSV 05/R AssemblyTest steps SSV 05/R Trouble-shooting Problem RemedyTechnical data SSV 05/R Dimension sheet SSV 05/R Spare parts list SSV 05/R Pos Designation ID-No Maintenance and control unit Designation ID-No