Sterling operating instructions SSV 05/R Maintenance intervals

Page 27

SSV 05/R

5.1. Maintenance intervals

daily:

Check the setting of the pressure reducer.

 

Empty the water separator.

Check the danger signs on the unit for legibility

 

and completeness.

monthly:

Clean the filter and sieve

 

(depending on accumulation of dust!).

 

Blow out the filter from the inside out by means

 

of compressed air.

Check the unit plugs for proper functioning.

every six months:

Check all electrical and mechanical connections

 

for proper fit.

Replace the filter and the sieve

(depending on accumulation of dust!).

F

The given maintenance intervals are average values.

Check whether in your individual case the maintenance in- tervals must be shortened.

SM4-605

Maintenance 26

Image 27
Contents Sterling Material Processing Operating Instructions Single Conveyor Unit SSV 05/RTechnical service SSV 05/R Sterling Material ProcessingEdition 08/99 SSV 05/R Parts and Service Department Table of contents SSV 05/R Technical data Safety instructions Safety instructionsSSV 05/R SSV 05/R Explanations and information SSV 05/R For your safety SSV 05/R SSV 05/R SSV 05/R For the safety of the units Installation instructions SSV 05/R General information SSV 05/R Installing the conveyor hopper SSV 05/R Installing the control and maintenance unit SSV 05/R Connecting the compressed-air supply SSV 05/R Electrical connection Functional description SSV 05/R Method of functioning Control and maintenance unitSet-up Filling level too high Basic setting of the filling level in the conveyor hopperSSV 05/R Preparations Filling level too lowSet-up Maintenance SSV 05/R SSV 05/R Maintenance intervals Disassembly SSV 05/R Cleaning/replacing the filter cartridgeAdjusting the level probe SSV 05/R AssemblyTest steps SSV 05/R Trouble-shooting Problem RemedyTechnical data SSV 05/R Dimension sheet SSV 05/R Spare parts list SSV 05/R Pos Designation ID-No Maintenance and control unit Designation ID-No