Sterling operating instructions SSV 05/R Assembly, Adjusting the level probe

Page 29

SSV 05/R

Assembly

Assemble the sieve and the sealing ring.

Check the sieve for proper fit.

Clean the hopper loader by means of a vacuum cleaner.

Close the hopper lid.

Close the toggle-type fastener.

Assemble the filter cartridge.

&

Order number
filter cartridge:	ID 98171
Sieve:	ID 29252
Sealing ring:	ID 28628

5.3. Adjusting the level probe

F

See chapter “set-up”.

&

Order number
level probe:	ID 85480

SM4-605

Maintenance 28

Image 29

Contents Sterling Material Processing Operating Instructions Single Conveyor Unit SSV 05/REdition 08/99 Technical serviceSSV 05/R Sterling Material Processing SSV 05/R Parts and Service Department Table of contents SSV 05/R Technical data Safety instructions Safety instructionsSSV 05/R SSV 05/R Explanations and information SSV 05/R For your safety SSV 05/R SSV 05/R SSV 05/R For the safety of the units Installation instructions SSV 05/R General information SSV 05/R Installing the conveyor hopper SSV 05/R Installing the control and maintenance unit SSV 05/R Connecting the compressed-air supply SSV 05/R Electrical connection Functional description SSV 05/R Method of functioning Control and maintenance unitSet-up SSV 05/R Preparations Basic setting of the filling level in the conveyor hopperFilling level too low Filling level too highSet-up Maintenance SSV 05/R SSV 05/R Maintenance intervals Disassembly SSV 05/R Cleaning/replacing the filter cartridgeAdjusting the level probe SSV 05/R AssemblyTest steps SSV 05/R Trouble-shooting Problem RemedyTechnical data SSV 05/R Dimension sheet SSV 05/R Spare parts list SSV 05/R Pos Designation ID-No Maintenance and control unit Designation ID-No