2.1Installation
INSTALLATION AND WIRING
2.1.1 Instructions for installation
1)Handle the unit carefully.
The inverter uses plastic parts. Handle it gently to protect it from damage. Also, hold the unit with even strength and do not apply too much strength to the front cover alone.
2)Install the inverter where it is not subjected to vibration. Note the vibration of a cart, press, etc.
3)Note on ambient temperature
The inverter life is under great influence of ambient temperature. In the place of installation, ambient temperature must be within the permissible range
*For
4)Install the inverter on a
The inverter will be very hot (maximum. about 150°C (302°F) ). Install it on a
5)Avoid high temperature and high humidity.
Avoid places where the inverter is subjected to direct sunlight, high temperature and high humidity.
Note: The cooling section outside the enclosure has the cooling fan. Do not use the inverter in any envi ronment where it is exposed to waterdrops, oil mist, dust, etc.
6)Avoid places where the inverter is exposed to oil mist, flammable gases, fluff, dust, dirt, etc.
Install the inverter in a clean place or inside a "totally enclosed" panel which does not accept any suspended matter.
7)Note the cooling method when the inverter is installed in an enclosure.
When an inverter is mounted in an enclosure, the ventilation fans of the inverter and enclosure must be carefully positioned to keep the ambient temperature of the inverter below the permissible value. If they are installed in improper positions, the rise in ambient temperature will result in reduced performance of the inverter.
8)Secure the inverter vertically, with bolts.
Install the inverter on an installation surface securely and vertically with screws or bolts.
3