Mitsubishi Electronics FR-A500L instruction manual Parameter List, Parameters

4.1Parameter List

PARAMETERS

Func-	Parameter						Minimum		Refer To
				Name		Setting Range	Setting	Factory Setting	Page:
tion	Number
							Increments		<Note9>
	0	Torque boost (Note 1)				0 to 30%	0.1%	1%	48
	1	Maximum frequency				0 to 60Hz	0.01Hz	60Hz	49
	2	Minimum frequency				0 to 120Hz	0.01Hz	0Hz	49
functions	3	Base frequency				0 to 400Hz	0.01Hz	60Hz<50Hz>	50
	6	Multi-speed setting (low speed)				0 to 400Hz	0.01Hz	10Hz	51
	4	Multi-speed setting (high speed)				0 to 400Hz	0.01Hz	60Hz	51
	5	Multi-speed setting (middle speed)				0 to 400Hz	0.01Hz	30Hz	51
Basic
						0 to 360 sec	0.01 sec
	7	Acceleration time				0 to 3600 sec/	0.1 sec/	15 sec	52
	8	Deceleration time				0 to 3600 sec/	0.1 sec/	15 sec	52
						0 to 360 sec	0.01 sec
	9	Electronic thermal O/L relay				0 to 3600A	0.1A	Rated output cur-	52
								rent
	10	DC injection brake operation frequency				0 to 120Hz, 9999	0.01Hz	3Hz	54
	11	DC injection brake operation time				0 to 10 sec, 8888	0.1 sec	0.5 sec	54
	12	DC injection brake voltage				0 to 30%	0.1%	1%	54
	13	Starting frequency				0 to 60Hz	0.01Hz	0.5Hz	55
	14	Load pattern selection (Note 1)				0 to 5	1	0	55
	15	Jog frequency				0 to 400Hz	0.01Hz	5Hz	56
	16	Jog acceleration/deceleration time				0 to 3600 sec/	0.1 sec/	0.5 sec	56
						0 to 360 sec	0.01 sec
	17	MRS input selection				0,2	1	0	57
	18	High-speed maximum frequency				0 to 400Hz	0.01Hz	60Hz	57
functions	19	Base frequency voltage (Note 1)				0 to 1000V, 8888, 9999	0.1V	9999<8888>	57
	20	Acceleration/deceleration reference				1 to 400Hz	0.01Hz	60Hz<50Hz>	57
		frequency
	21	Acceleration/deceleration time				0,1	1	0	57
operation		increments
	*22	Stall prevention operation level				0 to 150%, 9999	0.1%	150%	58
	*23	Stall prevention operation			level at	0 to 150%, 9999	0.1%	9999	58
		double speed
Standard
	26	Multi-speed setting (speed 6)				0 to 400Hz, 9999	0.01Hz	9999	59
	24	Multi-speed setting (speed 4)				0 to 400Hz, 9999	0.01Hz	9999	59
	25	Multi-speed setting (speed 5)				0 to 400Hz, 9999	0.01Hz	9999	59
	27	Multi-speed setting (speed 7)				0 to 400Hz, 9999	0.01Hz	9999	59
	28	Multi-speed input compensation				0, 1	1	0	59
	29	Acceleration/deceleration pattern				0, 1, 2, 3	1	0	60
	30	Regenerative function selection				0, 1, 2	1	0	61
	31	Frequency jump 1A				0 to 400Hz, 9999	0.01Hz	9999	62
	32	Frequency jump 1B				0 to 400Hz, 9999	0.01Hz	9999	62
	33	Frequency jump 2A				0 to 400Hz, 9999	0.01Hz	9999	62
	34	Frequency jump 2B				0 to 400Hz, 9999	0.01Hz	9999	62
	35	Frequency jump 3A				0 to 400Hz, 9999	0.01Hz	9999	62
	36	Frequency jump 3B				0 to 400Hz, 9999	0.01Hz	9999	62
	37	Speed display				0,1 to 9998	1	0	63
Output terminal functions	41	Up-to-frequency sensitivity				0 to 100%	0.1%	10%	64
	43	Output frequency detection for reverse				0 to 400Hz, 9999	0.01Hz	9999	64
	42	Output frequency detection				0 to 400Hz	0.01Hz	6Hz	64
		rotation
	44	Second acceleration/deceleration time				0 to 3600 sec/	0.1 sec/	5 sec	65
						0 to 360 sec	0.01 sec
functions	45	Second deceleration time				0 to 3600 sec/	0.1 sec/	9999	65
						0 to 360 sec, 9999	0.01 sec
	46	Second torque boost (Note 1)				0 to 30%, 9999	0.1%	9999	65
Second	47	Second V/F (base frequency) (Note 1)				0 to 400Hz, 9999	0.01Hz	9999	65
	*48	Second	stall	prevention	operation	0 to 150%	0.1%	150%	65
		current
	49	Second	stall	prevention	operation	0 to 400Hz, 9999	0.01Hz	0	65
		frequency
	50	Second output frequency detection				0 to 400Hz	0.01Hz	30Hz	64

18