Mitsubishi Electronics FR-A500L Temperature applicable for a short period in transit, etc

SPECIFICATIONS

	Display on	Operating
		status
	operation panel
	FR-DUO4 or
	parameter unit
Display	FR-PU04	Alarm
		definition
		Operating
	Additional	status
	display on	Alarm
	parameter unit
	(FR-PU04)	definition
	only	Interactive
		guidance

Protective/alarm functions

Environment	Ambient temperature (1)
	Ambient humidity
	Storage temperature (2)
	Ambience
	Altitude, vibration

Selection can be made from output frequency, motor current (steady or peak value), output voltage, frequency setting, running speed, motor torque, converter output voltage (steady or peak value), electronic overcurrent protection load factor, input power, output power, load meter, motor exciting current, cumulative energization time, actual operation time, watt-hour meter, regenerative brake duty and motor load factor.

Alarm definition is displayed when protective function is activated. 8 alarm definitions are stored.

(Four alarm definitions are only displayed on the operation panel.)

Input terminal signal states, output terminal signal states, option fitting status, terminal assignment status

Output voltage/current/frequency/cumulative energization time

immediately before protective function is activated

Operation guide and troubleshooting by help function

Overcurrent shut-off (during acceleration deceleration, constant speed) regenerative overvoltage shut-off, undervoltage, instantaneous power failure, overload shut-off (electronic overcurrent protection), ground fault overcurrent, stall prevention, overload warning, fin overheat, option error, parameter error, PU disconnection, No. of retries over, output open phase, CPU error, 24VDC power supply output short circuit, operation panel power supply short circuit, main circuit error

−10°C to +40°C (non-freezing)

90%RH or less (non-condensing)

−20°C to +65°C

Indoors. (No corrosive and flammable gases, oil mist, dust and dirt.)

Max. 1000m (3280.80 feet) above sea level, 5.9m/s2 {0.6G} or less (conforms to JIS C 0911)

Note: 1. For FR-A560L-375K, 450K at constant torque (CT) rating maximum ambient temperature can be 50°C (122°F).

2. Temperature applicable for a short period in transit, etc.

43