ASSEMBLY
4To remove the guard, release the latch and pull the handle upwards and inwards to the guard. Lock the plastic heel on the upper stay.
Connect the hydraulic unit
IMPORTANT! This machine is only intended for use together with a Husqvarna PP 355, Husqvarna PP 455 and Husqvarna RC 455. All other use is forbidden.
Please read the operator´s manual supplied with the hydraulic unit before using the machine.
When the saw unit, the blade and the blade guard are mounted, the hydraulic hoses and the water cooling should be connected.
There are two types of hydraulic hoses for the saw:
•The four thin hoses control the feed motors, i.e. the saw’s travel feed on the rail and the feed - removal of the blade. The two thick hoses drive the blade.
•The couplings should be wiped clean to reduce the risk of leakage before the hoses are fitted. Both the thin and thick hoses are locked by turning the outer sleeve on the female coupling so that the groove in the sleeve moves away from the ball.
12 – English