BLADE GUARD ACCESSORIES
Deluxe Uniguard® Blade Guard
The Delta Model 34-976 Uniguard Blade Guard with Splitter and Anti-kickback Fingers Fig. 151, is an accessory that can be used in place of the standard blade guard that is supplied with the Contractor’s Saw. The Delta Model 34-976 Uniguard Blade Guard can be mounted to the Contractor’s Saw with a UniRip or Unifence, fence systems.
78-953Uniguard Strap Kit. Kit replaces the rear angle rail of Biesemeyer 30" and 50" Commercial Fence Systems and Home Shop Fence Systems up to 52" for mounting the No. 34-976 Delta Uniguard Blade Guard.
Mounting hardware included.
Fig. 151
Biesemeyer® T-Square®Table
Saw Blade Guard System
The Biesemeyer Model 78-960 T-Square Table Saw Blade Guard System Fig. 152, is an accessory that can be used in place of the standard blade guard that is supplied with the Contractor’s Saw.
Catalog Listing Blesemeyer T-Square Blade Guard
Systems
78-96010" System for Home Shop 52" and Commercial 50" Fence Systems. With T-arm assembly, blade guard, splitter, installation bracket, mounting hardware and instruction manual.
78-95510" System for Home Shop 28", 40" and Commercial 26", 30" and 38" Fence Systems. Same as 78-960 except for fence systems 40" and under.
Fig. 152