Delta 36-426 instruction manual Accessories

Page 49

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

WARNING: Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

MODEL

DESCRIPTION

34-976

Deluxe Uniguard Blade Guard

78-960

Biesemeyer T-Square Table Saw Blade Guard System

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited Warranty

Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

49

Image 49
Contents Limited Edition 10″ Contractor’s Saw General Safety Rules Properly Support Long or Wide workpieces Additional Safety Rules for Table SawsGrounding Instructions Power ConnectionsMinimum Gauge Extension Cord Extension CordsUnpacking and Cleaning Unifence T-SLOT Rail Fence System Unpacking Biesemeyer T-SQUARE Fence System1718 Page Assembling SAW Stand Assembly InstructionsAssembling SAW to Stand Motor Assembling Blade Tilting HandwheelAssembling Motor to Motor Mounting Plate Assembling Motor and Motor Mounting Plate to SAW Page Connecting Motor Cord to Switch Assembly Assembling Blade Guard and Splitter Assembly If an alignment is necessary, loosen the two screws Page Assembling Extension Wing Assembling Switch to Extension WingUnifence Assembly Instructions Assembling Table Board to SAW BA C B Assembling Unifence Table to SAW Assembling Unifence Guide Rail Assembling Rail Stop Setting T-SLOT Rail StopAssembling Unifence Body to Guide Rail Assembling Cursor to Unifence BodyAssembling Unifence to Unifence Body Biesemeyer T-SQUARE Fence System Assembly InstructionsPage 8″ M ″ L 4 ″ K Page Starting and Stopping SAW Locking Switch OFF PositionOverload Protection Tilting the Blade Raising and Lowering the BladeChecking Blade Alignment Miter Gage Operation and Adjustment Adjusting Blade AlignmentChanging the SAW Blade Adjusting Table InsertDust Chute Storing the Miter GAGE, RIP FENCE, and Arbor WrenchesFence Operation Adjusting Fence Parallel to Miter Gage Slots Adjusting Clamping Action of Fence Locking Handle Adjusting Fence Degrees to TableRepositioning Motor for Storage Protecting Cast Iron Table from Rust Common Sawing OperationsCROSS-CUTTING Unifence can be Used AS a CUT-OFF Gage For Unifence Systems onlyConstructing a Push Stick Ripping with the UnifenceRipping on Left Side of SAW Blade Using Auxiliary Wood Facing on RIP FenceUsing Accessory Moulding Cutterhead Shows a typical dado operation using Miter gage as a guide Using Accessory Dado HeadConstructing a Featherboard Biesemeyer T-SQUARE Fence System Fence Operation Adjusting Fence Parallel to Miter Gage SlotsLubrication Adjusting Clamping Action of Fence Locking HandleConstructing a Push Stick PushstickDeluxe Uniguard Blade Guard Blade Guard AccessoriesAccessories Page Page Canadian PORTER-CABLE Delta Service Centers