Dust Collection, Lubrication, Accessories, Cleaning

passes rather than attempting to make it with one pass. Maximum dado width on this saw is 13/16" (20mm). DO NOT USE WIDER COMBINATIONS.

CAUTION: Always check dado blade clearance before plugging in the saw.

Be sure to place the guard and standard throat plate back in position and check adjustments when the dado cuts are complete.

Dust Collection

Your table saw is equipped with a dust shroud and dust col- lection port. For best results, connect a vacuum to the port at the rear of the saw.

If the saw is operated without a vacuum attached, most of the dust will be blown out the dust collection port. However, some dust will fall inside the base. If the saw is used on a table or other surface without an opening on the bottom, clean out the base and accumulated saw dust after each cut.

After extended use, the saw’s dust collection system may become clogged. To clear the dust collection system:

a)Unplug the saw.

b)Turn the saw on its side, so the bottom, open part of the unit is accessible.

c)Open the dust access door shown in Figure 24 by removing the two hair pin cotters shown. Clean out the excess dust, and re-secure the access door with the hair pin cotters.

When cutting wet wood without a vacuum or when cutting with a dado blade, removing the dust access door may be helpful in preventing clogs.

Lubrication

1.All motor bearings are permanently lubricated at the fac- tory and no additional lubrication is needed.

2.The height adjustment screw may require periodic cleaning and lubrication. If you have difficulty raising or lowering the blade:

a)Unplug the saw.

b)Turn the saw on its side, so the bottom, open part of the unit is accessible.

c)Clean and lubricate the height adjustment screws threads on the underside of your saw with general purpose grease, shown in Figure 25.

Accessories

Recommended accessories for use with your tool are avail- able at extra cost from your distributor or local service center. DEWALT manufactures the following accessories for your saw:

Portable Saw Stand

Outfeed Side Support Replacement Throat Plate Dado Throat Plate

CAUTION: The use of any non-recommended accesso- ry may be hazardous.

If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 or call 1-800-4-DEWALT (1-800-433- 9258).

Cleaning

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Never use solvents to clean saw or guard components.

Important

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorized ser- vice centers or other qualified service organizations, always using identical replacement parts.

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of war- ranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433- 9258). This warranty does not apply to accessories or dam- age caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

1 YEAR FREE SERVICE

DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT for a free replacement.

English

DW744 specifications

The DeWalt DW744 is a highly regarded portable table saw that stands out in the woodworking and construction industries, known for its robust design and user-friendly features. This saw is ideal for both professional contractors and DIY enthusiasts, making it a versatile addition to any toolkit.

One of the main features of the DW744 is its powerful 15-amp motor, which delivers an impressive 4,800 RPM. This robust motor allows the saw to handle a variety of materials with ease, ensuring smooth cuts in both softwood and hardwood. The motor is coupled with a 10-inch carbide blade, providing a cutting capacity of up to 24 inches to the right and 12 inches to the left. This expansive cutting capacity makes it suitable for handling a wide range of projects, from framing to cabinetry.

The DW744 employs a rolling stand, which is designed for easy transport and setup. This feature is particularly valuable for contractors who frequently move from job site to job site. The stand is sturdy yet lightweight, allowing quick assembly and disassembly without compromising stability. Additionally, the saw's compact design offers an efficient footprint that can fit into tighter spaces without difficulty.

One of the standout technologies integrated into the DW744 is the Rack and Pinion Blade Positioning System. This innovative system enables precision adjustments of the blade height and angle, ensuring accurate cuts every time. Furthermore, the saw includes a dust collection port that helps maintain a cleaner workspace by connecting to a vacuum for efficient dust management. This feature not only enhances visibility during cutting but also contributes to a healthier working environment.

Safety is paramount in the design of the DW744, which includes several features aimed at protecting the user. The saw is equipped with a sturdy blade guard and anti-kickback pawls, reducing the risk of accidents. The power switch is conveniently positioned and designed to minimize accidental startup, enhancing the overall safety of the tool.

In summary, the DeWalt DW744 is distinguished by its powerful motor, extensive cutting capacity, portability, and user-friendly features. With innovations like the Rack and Pinion Blade Positioning System, robust safety features, and effective dust control, this portable table saw caters to the needs of a diverse range of users, making it a top choice in the market. Whether for professional use or home projects, the DW744 promises reliable performance and durability.