Caution: Wear appropriate hearing protection during use. Under some conditions and duration ofuse, noise from this product may contribute to
hearing loss.
Caution:Spark deflector will get hot. Avoid touching or adjusting while hot. Keep cordset and materials away from spark deflector.
•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
Warning: Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and
body.For your convenience and safety, the following warnings are on your
For safe operation read the instruction manual.
•Do not use toothed blades.
•Use only reinforced wheels rated 4100 rpm or higher.
•When servicing use only identical replacement parts.
•Always: wear eye protection, use guards, clamp work in vise, use proper respiratory protection.
•Do not expose to rain or use in damp locations.
•Only use chop saw wheel of a max. Thickness of 2.8mm and a max. Diameter of 355mm.
Warning symbols
The label on your tool may include the following symbols:
.......................Use Eye Protection
.......................Use Ear Protection
V .......................Volts
ENGLISH
A | Amperes |
Hz | Hertz |
W.......................Watts min.......................minutes
.......................Alternating current
|
|
|
| Direct current |
|
|
| ....................... | |
|
|
|
| |
|
|
|
|
|
| n0 | No load speed | ||
|
|
| ....................... | Class II Construction |
|
|
| ....................... | Earthing terminal |
|
|
| ....................... | Safety alert symbol |
| .../min | Revolutions or reciprocationsper minute | ||
Electrical safety
Warning! If the power cord is damaged, it must bereplaced by the manufacturer, authorizedBlack & Decker Service Center or an
equally qualified person in order to avoid damage or injury.If the power cord is replaced by an equally qualified person, but not authorized by Black &Decker, the warranty will not be valid.
Features (fig. 1, 4)
A.Lock on Switch
B.Spark Deflector Screw
C.Spark Deflector
D.Base
E.Fence
F.Vise
G.Flat Wrench
H.Crank
5