Craftsman 315.21829 saw for the cut work, Fence Making a Miter CUT, See F-agure43, See Ffeures44

Page 32

• P_acesupport/,thesameheight as saw tablel behind

the .saw for the cut work.

•Make sure the wood is clear of the blade before turning on ti'_e,_Lw.

•Use a push block or push stick to move the wood

through the out past the bla_deNever. push a emafl piece of wood into the blade with your hand, always use a push stick. The use of push blocks, push sticks, and feathathoards are necessarywhen ma_rngnon- through cuts.

•Stand to the side of the wood as it contacts the blade to reduce the chance of injuryshould kickback occur.

Never stand directly in the line of cut.

•Make sure thewood iss[ear of the blade beforeturning on the saw.

•Let the blade b_Jildup to full speed before feeding the workplece into the blade.

•When the cut is made, turn the saw off. Wait for the bladeto come to a completestop before reme_ng the wo_pieoe.

RiP CUT

RiP

FENCE

MAKING A MITER CUT

See F-agure43.

It is recommendedyou rnske test outs on scrap wood.

_k WARNING: Make sure the blade guard assembly is installedand working pmper]y to avoid serious poes_is injury.

•Remove the rip fence by liftingthe locking handle.

•Set the miter gauge to the desired angle and tightsn the lock knob.

•Place a support(the same height as saw table) bah'rod the saw for the cut work.

•Make sure the wood is clear 0f the blade before turning on the saw.

•Let the blade bugd up to full speed before moving the work,piece intotheb_ade.

•Feed the work:pieceintothe blade until the out has been completed.

MITERCUT

BLADE

MITERGAUGE

ANGLEDHEIGHT AOJUSTING HANDWHEB.

Fig. 43

MAKING A BEVEL CROSS CUT

See Ffeures44 - 45.

It is recommendedthat you place the piece to be saved on the leftside of the bladeand that you make s test cut

on scrap wood.

X

WARNING: Make sure the blade guard assambly is instsJlsdand workingpmpedy to avoid serious pose'loisn)ury.

•Untookthe bevel Iocking 1ever.

•Remove the rip fence by liftingthe [o,_kinghandle.

•Turn the height adjustinghandwhesl until the bevel

indicator is at the desiredangle. Push the beve( lockinglever securelyto the left to lock the angle.

•Set the blade to the correctdepth for the workpiece.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents 10 in. Table SAW Customer Help Line 983000-693 15-05ONE Year Full Warranty on Craftsman Tool KNIFE/SPREADER/SPLITTER in Place and in working order Keep Blades CLEAN, SHARP, AndwithAlways Keep the Blade Guard and Riving Always USE a Push Stick for Ripping NAR Before Making a CUT, be Sure ALL Adjust Ments are SecureBlade Coasts After Being Turned OFF Avoid Awkward Operations and Hand Save These INSTRUCTIONS. Refer to themJmin Symbol Name Desig NATION/EXPLANATIO NMinutes Time Symbol Signal Awarning Caiion Meaning Your nearest Authorized Service Center for repairWhen servicing, use onyidenticalreplacement parts Servicingrequires extreme care and knowledgeSAW Receptacle Motor Power Electrical Connection Speed and WiringExtension Cords Grounding InstructionsCutter Head planers and Jointera Number ofturnscompletedby a spinningobjectin one minuteAmperes Product Specfications120 V, 60 Hz AC only Know Your Table SAW See FigureOperatingcomponents Blades Combinationflatblade SquarescrewdriverThefollowing items are included with your table saw Small BadeWrench@ D Thefolidwing items are includedwith your table sawUnpacking To Open the LEG StandSee Figures 7 BaseTOSECURE/LEVELTHESAW See F-igum9See Figures 10 Sliding miter tableSee Figures 13 Bevel HandleSee F-tre TOUNLOCK/MOVETHERAILS ReleaseTochecksawbladeinstallation To Install the Sliding Miter Table and Miter FenceSee Figures fg Lockingclamps Throat Plate Small Wrench Large BladeoSee Flours21 SeeBasic Operation of the Table SAW Not recommended can resultin serious personal injuryRIW ANTI-KICKBACKSHIMS HNS Applications Causes of Kickback Avoiding KickbackUse the right type of blade for the cut being made Cutting AidsRIP CUT Mitercut Compoundbevelmitercut Types of CutsCutting Tips HOW to Make a Featherboard Diameter HOW to Mount a FeatherboardFeatherboard See F/gumChecking Sliding Miter Table and Making Adjustments TochangethebladedepthSee Rgure Not Front of miter base is on infead se of sawTo Adjust The Miter Base sectionthat follows Check Miter Fence AlignmentTo Adjust the Miter Base Mitertable Slides To Adjust the Miter FenceTo Adjust Quick Stop StopSee F=Jgure39 Makingcuts Test cut on scrap wood firstMaking a Cross CUT See Figures40.saw for the cut work Fence Making a Miter CUTSee F-agure43 See Ffeures44Fiouspersonalinjury BEVELRiP. CUT 8LADE Angled Scale Making a Compound Bevel Miter CUTMaking a Large Panel CUT See gMaking a Dado CUT NON-THROUGHCUT Guard Blade Removed Push StickAccessory Table Usage Knobbolt Nutbetween Adjustment ScrewsRear Table Clampng BracketToinstallguidefencebrackets NUTSee Ftgure55 ToinstallrouterTo Install BIT and Throat Plate To Replace the Blade See Figures57Throm Plate Blade Bladethroatplate Rmng Knife Blaie Large Small WrenchSee Figures 60 Framing Square Rivingblade KnifeTo Adjust the Miter Gauge To Adjust the Bevel Locking Lever HEIGHT/BEVELADJUSTING Hanowheel Socket Hdsew SetscrewBlade Screws HANDLEFigToaugnthemiterlockingclamps ScrewLocker Bracket Assembly GeneralLubrication ElevatingshaftSolution CauseProblem Cause Check and adjustthe rip fence Reeharpenor set bladeLockinglever is not at full left position BJadenot proper for rip cutFORlEG Standassembly Craftsman 10 in. Table SAW Model noParts List Figure a Craftsman 10 in. Table SAW Model NO, 3t5.2t8290Parts List QtyCraftsman 10 in. Table SAW- Model no Key PartNumber Deecdptlon Description QtyScrew Craftsman t0 in. Table SAW Model no t5.218290 Figure F Miter Gauge Assembly Craftsman 10 in. Table SAW Mooel noA181014601 Craftsman t0 in. Table SAW Model no Figureg411061704 Parts List for Figure GKey Part Number DescdpUon Qty Description Call anytime, day or night U.S.A. and Canada Call anytime, day or night U.S.A. only

315.21829 specifications

The Craftsman 315.21829 is a versatile and robust power tool designed for a variety of home improvement and woodworking tasks. Known for its reliability, this model is part of the Craftsman family, a brand that has built a reputation for offering user-friendly tools that provide high performance without compromising on safety and comfort.

One of the standout features of the Craftsman 315.21829 is its powerful motor, delivering ample horsepower to tackle demanding jobs. Whether you are cutting, sanding, or drilling, this tool ensures efficient operation and quick results. The design reflects an emphasis on power and precision, enabling users to achieve professional-quality finishes.

The ergonomic design of the Craftsman 315.21829 includes a comfortable grip, which reduces fatigue during extended use. This aspect is particularly important for both DIY enthusiasts and professionals who often spend long hours working on projects. The lightweight nature of the tool also contributes to its ease of use, making it suitable for a wide range of applications around the home and workshop.

A key technological feature of the Craftsman 315.21829 is its variable speed control, allowing users to adjust the tool's speed according to the specific requirements of the task at hand. This flexibility enhances control and precision, especially when working with delicate materials or intricate designs. The built-in safety features provide added peace of mind, ensuring that the tool operates under safe conditions at all times.

Another highlight is the compatibility with a wide range of accessories, which enhances the versatility of the Craftsman 315.21829. Users can easily switch between tasks, whether they are drilling holes, driving screws, or finishing surfaces. This adaptability makes it a valuable addition to any toolkit.

Overall, the Craftsman 315.21829 stands out for its combination of power, versatility, and user-friendly design. It caters to both seasoned professionals and DIY novices, enabling a wide array of projects to be completed with ease and precision. With its robust features and reliable performance, this tool continues to be a favorite in the realm of home improvement and woodworking.
Top Page Image Contents