Carrier 592-085 warranty FIELD-INSTALLED Accessories 52P and 52C, Wall Sleeves

Page 16

FIELD-INSTALLED ACCESSORIES (52P AND 52C)

WALL SLEEVES

Weather Last™ Wall Sleeve

For the best performance and longest life, Carrier recommends genuine Carrier wall sleeves for all installations.

All Carrier wall sleeves are built with a pitch of 1/4 in. per foot; for self-pitching of the unit, the wall sleeve must be installed level (any error should be pitched to the outside). Overflow slots on the outside of the sleeve are in place to divert excess water during severe weather.

Important Sleeve Installation Considerations:

•All Carrier's sleeves are self pitching and must be mounted level in all directions. (Do not use rails to level sleeve.)

•The sleeve should be caulked on all sides, includ- ing both inside and outside the building.

•If more than 4 in. of wall sleeve projects into the room, an accessory subbase must be used for support.

•For all applications with an accessory subbase,

wall sleeve must extend 31/4 in. minimum into room and must be 31/4 in. minimum to 51/2 in. maximum above floor (including carpeting) to allow for proper fit of subbase.

•For applications where the wall sleeve is mounted flush to the exterior of the building (or recessed in), Carrier recommends a field- supplied drip edge be installed to prevent water infiltration into the building.

•Insulated wall sleeves should be considered for superior sound absorption, to reduce heat loss and to prevent sleeve sweating, a condition that can occur when the outside temperature is cold and the indoor conditions are warm and humid.

Polymer Wall Sleeves

Choose a polymer wall sleeve for maximum protec- tion and appearance.

All Carrier’s polymer wall sleeves are made from a molded polymer that is designed for strength and dura- bility. This material has excellent corrosion resistance and a flammability rating of UL94-5V.

The sleeve surface is textured to prevent shine and hide scratches. The rib configuration on the sleeve bot- tom, allows easy chassis removal and aids in drainage. The locating holes in the side and top panels, allow easy fastening of the sleeve to wall openings. Refer to dimension drawings (pages 28 and 29) for typical wall installation and dimensions.

The sleeve's alpine mist color (a shade of beige) closely matches the front panel and blends in well with any inside or outside decor.

The polymer wall sleeve comes in both insulated (fac- tory installed) or non-insulated, to meet the require- ments of every application.

Insulated Polymer Wall Sleeve

Part No.: SLEEVE-INSUL-1PK

Carrier’s accessory insulated polymer wall sleeve, with factory-installed insulation, provides superior sound absorption, reduces heat loss and prevents sleeve sweating, a condition that can occur when the outside temperature is cold and the indoor conditions are warm and humid.

IMPORTANT: Insulated Polymer Wall sleeve pro- vides superior sound absorption, reduces heat loss and prevents sleeve sweating.

Corrosion-Protected Polymer Sleeve

Non-Insulated Polymer Wall Sleeve

Part No.: WALL-SLEEVE-1PK

Part No.: WALL-SLEEVE-9PK

Carrier’s accessory non-insulated polymer wall sleeve, provides a superior appearance and protection for many applications.

For applications where weather conditions could influence sleeve sweating, a condition that can occur when the outside temperature is cold and the indoor conditions are warm and humid, the Insulated Poly- mer Wall sleeve should be considered.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Contents Architects and ENGINEERS’ ManualPage RETROFIT/REPLACEMENT Carrier WarrantyApplications NEW ConstructionApplications Application ConsiderationsUndersizing OversizingFan Cycle Switch Dual options Product Overview 52P and 52CProduct Features and Benefits 52P and 52C Quiet OperationMost Efficient Performance Efficient FAN MotorRemovable Front Panel NO-RUST Weather Last Wall Sleeve and Front PanelANTI-THEFT Knobs Product Features and Benefits TWO-PIECE Lifetime Indoor FilterWashable Vent AIR Filter BI-DIRECTIONAL Discharge GrilleBI-MOLDED Condenser Shroud Power Cord for 265-V UnitsSnow Baffle Easy Access to Chassis Temperature Limiter and Control KnobFan Cycle Switch Hidden ControlsEnhanced Copper Tubing Seamless BasepanCondensate Drain Valve Condensate Removal SystemHeat Pumps PAY Their OWN WAY Special FeaturesHow The Heat Pump Works Heat Pump Energy Savings Cooling Electric Premium Zone CapacityOrdering Data 52P and 52C NumberWall Thermostat Control RC,RP FACTORY-INSTALLED Options 52P and 52CCorrosion Protection CP,RP FIELD-INSTALLED Accessories 52P and 52C Wall SleevesInsulated Metal Wall Sleeves Wall Sleeve Molding KitFriedrich and ZoneAire Retro- fit Wall Sleeve Adapter Climate Master Wall Sleeve AdapterFIELD-INSTALLED Accessories 52P and 52C Outdoor GrillesAluminum Architectural Outdoor Grilles Louvered Polymeric Architectural Outdoor Grilles LouveredOutdoor Grille Selection Hardwire KitConduit Interface Kit Subbase Non-electrical subbaseLeveling legs Subbase Power Disconnect SwitchSubbase Fuse Kit Thermostats Digital Programmable ThermostatNon-Programmable Thermostat Manual Changeover Wall ThermostatSpeed Fan Control from Wall Thermostat Wall Thermostat Interface Retrofit KitThermostat Locking Cover Condensate Drain Kit Lateral Duct KitPower Vent with Power Door Kit Lateral Air DeflectorCurtain Deflector Security Door KitReplacement Filters Energy Management KitTypical Wall Installation Dimension Drawings and Installation Data NEW Construction208/230-V Units Dimension Drawings and Installation Data NEW Construction Typical Wall Installation Minimum Clearance for Indoor Outdoor Discharge AIR Typical Lateral Duct Installation 52P and 52C with Subbase Electrical ConnectionsWall Thermostat Connections Product Data 52P Model 52PQ 230/208-1-60Model 52PQ CAPACITY* Btuh52PQ Rev. Cycle 265Product Data 52P Model 52PC and PE 230/208-1-60Model 52PC and PE Product Data 52C Model 52CQ 230/208-1-60Cooling Heating 52CQ Rev. CycModel 52CQ Heating Cooling 52CQ Rev. CycleProduct Data 52C Model 52CE 230/208-1-60Heating† Cooling 52CEModel 52CE 52CE VoltsExpanded Ratings Data 52P and 52C Cooling PerformanceEvaporator entering air temp. 80 F Evap. air 260 CFM Evaporator entering air temp. 80 F Evap. air 350 CFMCooling Sensible Heat Factors SHF AT 80 F Indoor DB Cooling PerformanceEvaporator entering air temp. 80 F Evap. air 320 CFM Indoor Sound Data 52P and 52C Sound Data 52P and 52CSound Transmission Class STC = Wiring Diagrams 52P and 52C SLSWiring Diagrams 52P and 52C ‘R’ 24 VAC Output Power to Wall ‘C’ Common ThermostatPage Wiring Diagrams 52P and 52C Following are recommended wire sizes Maximum Length ftMaster Ptac Unit O C ’STAT Guide Specifications Hvac Guide SpecificationsGuide Specifications Page Typical Warranty CarrierCarrier Corporation Accessory List Accessory Form Number Part Number Description

592-085 specifications

The Carrier 592-085 is a leading-edge commercial air conditioning unit designed to provide efficient cooling solutions for various business environments. Known for its reliability, performance, and advanced technology, the Carrier 592-085 has become a popular choice among facility managers and HVAC professionals alike.

One of the primary features of the Carrier 592-085 is its impressive cooling capacity, which can handle large spaces with ease. The unit operates effectively in various climates, maintaining optimal indoor temperatures even during the hottest summer months. With a cooling capacity rating of 8.5 tons, it can accommodate medium to large commercial spaces, ensuring comfort for employees and customers.

The unit is equipped with advanced inverter technology, which allows it to adjust cooling output based on real-time demand. This not only enhances energy efficiency but also leads to significant cost savings over time. The inverter-driven compressor operates silently, reducing noise levels without compromising on performance.

In addition to its energy-efficient capabilities, the Carrier 592-085 features highly innovative refrigerant management. The unit uses R-410A refrigerant, which is environmentally friendly and contributes to reducing ozone depletion. This makes it an ideal choice for businesses looking to minimize their ecological footprint while maintaining effective cooling.

The Carrier 592-085 also boasts durable construction, with weather-resistant materials designed to withstand harsh external conditions. This ensures longevity and reduces maintenance needs in the long run. The unit's design also includes access panels for convenient servicing, making it easier for technicians to perform routine maintenance and repairs.

Moreover, the Carrier 592-085 is compatible with advanced building management systems, allowing for seamless integration into existing operations. Features such as remote monitoring and control provide users with the flexibility to manage their HVAC systems efficiently, enhancing overall operational efficiency.

In summary, the Carrier 592-085 stands out in the commercial air conditioning market due to its robust performance, energy efficiency, and advanced features. From its inverter technology to eco-friendly refrigerant usage and durable design, this unit provides a comprehensive solution for those seeking reliable cooling in commercial settings. It represents a smart investment for businesses that prioritize both comfort and sustainability.
Top Page Image Contents