Carrier 592-085 warranty Subbase, Non-electrical subbase

Page 20

FIELD-INSTALLED ACCESSORIES (52P AND 52C) (cont)

SUBBASE

Part No.: SUBBASE-NON-ELEC

Part No.: SUBBASE-230V-30A

Part No.: SUBBASE-265V-30A

Part No.: SUBBASE-230V-15A

Part No.: SUBBASE-265V-15A

Part No.: SUBBASE-HARDWIRE

Part No.: SUBBASE-230V-20A

Part No.: SUBBASE-265V-20A

Part No.: LEVELING-LEGS

This decorative subbase supports the unit and is avail- able in three basic models: non-electrical, electrical, and hardwired.

A subbase (or leveling legs) is required for installa- tions where the wall sleeve extends 4 or more inches into the room or the wall is less than 2 in. thick. The minimum clearance between the bottom of the sleeve and the floor is 31/4 in., and the maximum clear- ance is 51/2 inches.

IMPORTANT: All standard cord-connected 265-v PTAC units will require a field-installed electrical subbase accessory per UL and NEC electrical codes.

All subbase models are pre-assembled, mount to the wall sleeve, and come with adjustable legs and side skirting to provide a finished appearance.

Non-electrical subbase

The easy to install, non-electrical subbase provides mechanical support and requires no wiring.

Non-Electrical Subbase Assembly

Electrical subbase

The electrical subbase has a factory-installed electrical junction box containing a receptacle for corded pack- aged terminal air conditioner (PTAC) units. The elec- trical subbase series offers models from 230-v, 15 amp up to 265-v, 30 amp. Knockouts are provided for power source connections.

Electrical Subbase Assembly

Hardwired subbase

The hardwired electrical subbase has a factory- installed junction box containing 19 in. of flexible conduit (for a perfect fit to the PTAC unit) and all mat- ing connections for easy assembly to PTAC units. Knockouts are provided for power source connections.

Hardwired Subbase Assembly

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Contents Architects and ENGINEERS’ ManualPage RETROFIT/REPLACEMENT Carrier WarrantyApplications NEW ConstructionApplications Application ConsiderationsUndersizing OversizingFan Cycle Switch Dual options Product Overview 52P and 52CProduct Features and Benefits 52P and 52C Quiet OperationMost Efficient Performance Efficient FAN MotorANTI-THEFT Knobs NO-RUST Weather Last Wall Sleeve and Front PanelRemovable Front Panel Product Features and Benefits TWO-PIECE Lifetime Indoor FilterWashable Vent AIR Filter BI-DIRECTIONAL Discharge GrilleSnow Baffle Power Cord for 265-V UnitsBI-MOLDED Condenser Shroud Easy Access to Chassis Temperature Limiter and Control KnobFan Cycle Switch Hidden ControlsEnhanced Copper Tubing Seamless BasepanCondensate Drain Valve Condensate Removal SystemHow The Heat Pump Works Special FeaturesHeat Pumps PAY Their OWN WAY Heat Pump Energy Savings Cooling Electric Premium Zone CapacityOrdering Data 52P and 52C NumberCorrosion Protection CP,RP FACTORY-INSTALLED Options 52P and 52CWall Thermostat Control RC,RP FIELD-INSTALLED Accessories 52P and 52C Wall SleevesInsulated Metal Wall Sleeves Wall Sleeve Molding KitFriedrich and ZoneAire Retro- fit Wall Sleeve Adapter Climate Master Wall Sleeve AdapterFIELD-INSTALLED Accessories 52P and 52C Outdoor GrillesAluminum Architectural Outdoor Grilles Louvered Polymeric Architectural Outdoor Grilles LouveredConduit Interface Kit Hardwire KitOutdoor Grille Selection Subbase Non-electrical subbaseSubbase Fuse Kit Subbase Power Disconnect SwitchLeveling legs Thermostats Digital Programmable ThermostatNon-Programmable Thermostat Manual Changeover Wall ThermostatThermostat Locking Cover Wall Thermostat Interface Retrofit KitSpeed Fan Control from Wall Thermostat Condensate Drain Kit Lateral Duct KitPower Vent with Power Door Kit Lateral Air DeflectorCurtain Deflector Security Door KitReplacement Filters Energy Management Kit208/230-V Units Dimension Drawings and Installation Data NEW ConstructionTypical Wall Installation Dimension Drawings and Installation Data NEW Construction Typical Wall Installation Minimum Clearance for Indoor Outdoor Discharge AIR Typical Lateral Duct Installation 52P and 52C with Subbase Electrical ConnectionsWall Thermostat Connections Product Data 52P Model 52PQ 230/208-1-60Model 52PQ CAPACITY* Btuh52PQ Rev. Cycle 265Product Data 52P Model 52PC and PE 230/208-1-60Model 52PC and PE Product Data 52C Model 52CQ 230/208-1-60Cooling Heating 52CQ Rev. CycModel 52CQ Heating Cooling 52CQ Rev. CycleProduct Data 52C Model 52CE 230/208-1-60Heating† Cooling 52CEModel 52CE 52CE VoltsExpanded Ratings Data 52P and 52C Cooling PerformanceEvaporator entering air temp. 80 F Evap. air 260 CFM Evaporator entering air temp. 80 F Evap. air 350 CFMEvaporator entering air temp. 80 F Evap. air 320 CFM Cooling PerformanceCooling Sensible Heat Factors SHF AT 80 F Indoor DB Sound Transmission Class STC = Sound Data 52P and 52CIndoor Sound Data 52P and 52C Wiring Diagrams 52P and 52C SLSWiring Diagrams 52P and 52C ‘R’ 24 VAC Output Power to Wall ‘C’ Common ThermostatPage Wiring Diagrams 52P and 52C Following are recommended wire sizes Maximum Length ftMaster Ptac Unit O C ’STAT Guide Specifications Hvac Guide SpecificationsGuide Specifications Page Typical Warranty CarrierCarrier Corporation Accessory List Accessory Form Number Part Number Description

592-085 specifications

The Carrier 592-085 is a leading-edge commercial air conditioning unit designed to provide efficient cooling solutions for various business environments. Known for its reliability, performance, and advanced technology, the Carrier 592-085 has become a popular choice among facility managers and HVAC professionals alike.

One of the primary features of the Carrier 592-085 is its impressive cooling capacity, which can handle large spaces with ease. The unit operates effectively in various climates, maintaining optimal indoor temperatures even during the hottest summer months. With a cooling capacity rating of 8.5 tons, it can accommodate medium to large commercial spaces, ensuring comfort for employees and customers.

The unit is equipped with advanced inverter technology, which allows it to adjust cooling output based on real-time demand. This not only enhances energy efficiency but also leads to significant cost savings over time. The inverter-driven compressor operates silently, reducing noise levels without compromising on performance.

In addition to its energy-efficient capabilities, the Carrier 592-085 features highly innovative refrigerant management. The unit uses R-410A refrigerant, which is environmentally friendly and contributes to reducing ozone depletion. This makes it an ideal choice for businesses looking to minimize their ecological footprint while maintaining effective cooling.

The Carrier 592-085 also boasts durable construction, with weather-resistant materials designed to withstand harsh external conditions. This ensures longevity and reduces maintenance needs in the long run. The unit's design also includes access panels for convenient servicing, making it easier for technicians to perform routine maintenance and repairs.

Moreover, the Carrier 592-085 is compatible with advanced building management systems, allowing for seamless integration into existing operations. Features such as remote monitoring and control provide users with the flexibility to manage their HVAC systems efficiently, enhancing overall operational efficiency.

In summary, the Carrier 592-085 stands out in the commercial air conditioning market due to its robust performance, energy efficiency, and advanced features. From its inverter technology to eco-friendly refrigerant usage and durable design, this unit provides a comprehensive solution for those seeking reliable cooling in commercial settings. It represents a smart investment for businesses that prioritize both comfort and sustainability.
Top Page Image Contents