Carrier 592-085 Dimension Drawings and Installation Data NEW Construction, 208/230-V Units

Page 27

DIMENSION DRAWINGS AND INSTALLATION DATA — NEW CONSTRUCTION

TYPICAL WALL

INSTALLATION

Proper building practices must be used when con- structing a wall opening to support a PTAC wall sleeve and chassis.

If practices are unknown, consult your local architect or building contractor.

Installed wall sleeve must be level from side to side and front to back.

DISCHARGE

GRILLE

REMOVABLE

FRONT PANEL

3.94"

15/20 AMP

PLUG HEAD

(100)

 

2.03"

 

(51.6)

 

1 -10

 

(558.8)

 

6

(152.4)

3 -6

(1067)ACCESSORY WALL SLEEVE

 

HINGED CONTROL

 

ACCESS DOOR

 

(SEE NOTE #8)

 

30 AMP IN-LINE

7.24"

CORD 208/230-V

(184)

SERVICE CORD

2.00"

30 AMP

(50.7)

12"

4 -4

(304.8)

(1320.8)

 

NOTES:

1.

Dimensions in parenthesis are in

 

millimeters.

 

 

2.

Minimum opening sizes apply to

 

all wall openings.

 

 

3.

Proper

building

practices must

 

be used when constructing a

 

wall opening to support a PTAC

 

wall sleeve and chassis. If prac-

 

tices are unknown consult your

 

local

architect

or

building

 

contractor.

 

 

4.

Installed wall sleeve must be

 

level from side to side and front

 

to back (do not use rails to level

 

sleeve).

 

 

 

5.

If wall sleeve extends into the

 

room more than 4-in., an acces-

 

sory subbase or field fabricated

 

front support should be used to

 

prevent wall sleeve from tipping

 

forward.

 

 

6.

For all

applications

with an

208/230-V UNITS

 

3’-6”

ACCESSORY

DISCHARGE

(1067)

GRILLE

 

WALL SLEEVE

 

 

HINGED CONTROL

 

 

ACCESS DOOR

REMOVABLE

 

(SEE NOTE #8)

FRONT PANEL

 

 

 

 

 

265-V

 

 

SERVICE CORD

 

6”

(SEE NOTE #9)

15”

 

(152.4)

 

(381)

15”

 

 

 

 

(381)

 

265-V UNITS

 

accessory subbase, wall sleeve

 

must extend into room 31/4-in.

 

(83 mm) minimum and 31/4-in.

 

(83 mm) minimum from floor.

7.

For all applications with an

 

accessory

lateral duct, sleeve

 

must extend into the room 3-in.

 

(76.2 mm) minimum. In applica-

 

tions where the sleeve will not

 

extend a minimum 3-in., the lat-

 

eral

duct

mounting

brackets

 

must

be

mounted

on

the

 

wall sleeve prior to wall sleeve

 

installation.

 

 

 

8.

Remote control models,

“RC”

 

and “RP” units, use low voltage

 

connections (24 volt AC).

 

9.

265 volt cord connected units

 

must plug into a 265 volt electri-

 

cal subbase per UL requirement

 

(or hardwire can be used).

 

10.

The 265 volt electrical cord is

 

approximately 15-in. long from

 

where it exits the front panel.

52P and 52C Dimension Drawing

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Architects and ENGINEERS’ Manual ContentsPage NEW Construction RETROFIT/REPLACEMENTCarrier Warranty ApplicationsOversizing ApplicationsApplication Considerations UndersizingProduct Overview 52P and 52C Fan Cycle Switch Dual optionsEfficient FAN Motor Product Features and Benefits 52P and 52CQuiet Operation Most Efficient PerformanceNO-RUST Weather Last Wall Sleeve and Front Panel Removable Front PanelANTI-THEFT Knobs BI-DIRECTIONAL Discharge Grille Product Features and BenefitsTWO-PIECE Lifetime Indoor Filter Washable Vent AIR FilterPower Cord for 265-V Units BI-MOLDED Condenser ShroudSnow Baffle Hidden Controls Easy Access to ChassisTemperature Limiter and Control Knob Fan Cycle SwitchCondensate Removal System Enhanced Copper TubingSeamless Basepan Condensate Drain ValveSpecial Features Heat Pumps PAY Their OWN WAYHow The Heat Pump Works Cooling Electric Premium Zone Capacity Heat Pump Energy SavingsNumber Ordering Data 52P and 52CFACTORY-INSTALLED Options 52P and 52C Wall Thermostat Control RC,RPCorrosion Protection CP,RP Wall Sleeves FIELD-INSTALLED Accessories 52P and 52CClimate Master Wall Sleeve Adapter Insulated Metal Wall SleevesWall Sleeve Molding Kit Friedrich and ZoneAire Retro- fit Wall Sleeve AdapterPolymeric Architectural Outdoor Grilles Louvered FIELD-INSTALLED Accessories 52P and 52COutdoor Grilles Aluminum Architectural Outdoor Grilles LouveredHardwire Kit Outdoor Grille SelectionConduit Interface Kit Non-electrical subbase SubbaseSubbase Power Disconnect Switch Leveling legsSubbase Fuse Kit Manual Changeover Wall Thermostat ThermostatsDigital Programmable Thermostat Non-Programmable ThermostatWall Thermostat Interface Retrofit Kit Speed Fan Control from Wall ThermostatThermostat Locking Cover Lateral Duct Kit Condensate Drain KitSecurity Door Kit Power Vent with Power Door KitLateral Air Deflector Curtain DeflectorEnergy Management Kit Replacement FiltersDimension Drawings and Installation Data NEW Construction Typical Wall Installation208/230-V Units Dimension Drawings and Installation Data NEW Construction Typical Wall Installation Minimum Clearance for Indoor Outdoor Discharge AIR Typical Lateral Duct Installation Electrical Connections 52P and 52C with SubbaseWall Thermostat Connections Model 52PQ 230/208-1-60 Product Data 52P265 Model 52PQCAPACITY* Btuh 52PQ Rev. CycleModel 52PC and PE 230/208-1-60 Product Data 52PModel 52PC and PE Rev. Cyc Product Data 52CModel 52CQ 230/208-1-60 Cooling Heating 52CQHeating Cooling 52CQ Rev. Cycle Model 52CQ52CE Product Data 52CModel 52CE 230/208-1-60 Heating† Cooling52CE Volts Model 52CEEvaporator entering air temp. 80 F Evap. air 350 CFM Expanded Ratings Data 52P and 52CCooling Performance Evaporator entering air temp. 80 F Evap. air 260 CFMCooling Performance Cooling Sensible Heat Factors SHF AT 80 F Indoor DBEvaporator entering air temp. 80 F Evap. air 320 CFM Sound Data 52P and 52C Indoor Sound Data 52P and 52CSound Transmission Class STC = SLS Wiring Diagrams 52P and 52C‘R’ 24 VAC Output Power to Wall ‘C’ Common Thermostat Wiring Diagrams 52P and 52CPage Wiring Diagrams 52P and 52C Maximum Length ft Following are recommended wire sizesMaster Ptac Unit O C ’STAT Hvac Guide Specifications Guide SpecificationsGuide Specifications Page Carrier Typical WarrantyCarrier Corporation Accessory Form Number Part Number Description Accessory List

592-085 specifications

The Carrier 592-085 is a leading-edge commercial air conditioning unit designed to provide efficient cooling solutions for various business environments. Known for its reliability, performance, and advanced technology, the Carrier 592-085 has become a popular choice among facility managers and HVAC professionals alike.

One of the primary features of the Carrier 592-085 is its impressive cooling capacity, which can handle large spaces with ease. The unit operates effectively in various climates, maintaining optimal indoor temperatures even during the hottest summer months. With a cooling capacity rating of 8.5 tons, it can accommodate medium to large commercial spaces, ensuring comfort for employees and customers.

The unit is equipped with advanced inverter technology, which allows it to adjust cooling output based on real-time demand. This not only enhances energy efficiency but also leads to significant cost savings over time. The inverter-driven compressor operates silently, reducing noise levels without compromising on performance.

In addition to its energy-efficient capabilities, the Carrier 592-085 features highly innovative refrigerant management. The unit uses R-410A refrigerant, which is environmentally friendly and contributes to reducing ozone depletion. This makes it an ideal choice for businesses looking to minimize their ecological footprint while maintaining effective cooling.

The Carrier 592-085 also boasts durable construction, with weather-resistant materials designed to withstand harsh external conditions. This ensures longevity and reduces maintenance needs in the long run. The unit's design also includes access panels for convenient servicing, making it easier for technicians to perform routine maintenance and repairs.

Moreover, the Carrier 592-085 is compatible with advanced building management systems, allowing for seamless integration into existing operations. Features such as remote monitoring and control provide users with the flexibility to manage their HVAC systems efficiently, enhancing overall operational efficiency.

In summary, the Carrier 592-085 stands out in the commercial air conditioning market due to its robust performance, energy efficiency, and advanced features. From its inverter technology to eco-friendly refrigerant usage and durable design, this unit provides a comprehensive solution for those seeking reliable cooling in commercial settings. It represents a smart investment for businesses that prioritize both comfort and sustainability.
Top Page Image Contents