Carrier 592-085 warranty Condensate Drain Kit, Lateral Duct Kit

Page 24

FIELD-INSTALLED ACCESSORIES (52P AND 52C) (cont)

Condensate Drain Kit

Part No.: DRAIN-KIT-4PK

This universal drain kit may be used internally or externally to route condensate to a drainage system. It can be field-installed on any Carrier wall sleeve.

Although Carrier’s units are designed to dissipate all the condensate generated during normal cooling, there may be times when abnormal conditions cause more condensate than the unit can dissipate. If condensate that drips from the wall sleeve is objectionable, this internal/external drain kit should be installed.

The drain kit may be attached to the exterior right or left side of the wall sleeve for external draining or may be mounted to the room side of the wall sleeve for internal draining.

IMPORTANT: For internal drains installed in the plastic wall sleeve, the drain must be installed on the flat area of the sleeve. It cannot be installed in the wafer area.

Lateral Duct Kit

Part No.: LATERAL-DUCT (Adapter Plenum and Extension)

The accessory lateral duct kit allows one unit to heat or cool two rooms. The kit provides substantial sav- ings for apartments, hotel suites, and office suites by eliminating the need for separate units for every room. The amount of air that can be diverted to an adjoining room is adjustable from 20 to 30 percent.

The lateral duct kit consists of two main components, the plenum and the extension duct. The kit mounts to the wall sleeve and allows either right or left side duct- ing. Consider the following when designing a ducted application.

•The maximum extension of the duct length is 4 feet.

•The duct run must be straight and horizontal; no bends or turns.

•The minimum recommended clearance between the unit and the adjoining room wall is 6 inches.

•You must provide for return air from the adjoining room.

•Carrier 52P and 52C units are not qualified for use with any other ducting scheme.

See page 31 for more information.

NOTES:

1.Lateral Duct Kit includes wall register for duct extension and a molding kit to trim the wall open- ing.

2.The sleeve should extend a minimum of 3-in. into the room to install mounting brackets.

3.The Lateral Duct Kit is not compatible with previ- ous PTAC models.

Drain Kit

Lateral Duct Kit

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Contents Architects and ENGINEERS’ ManualPage RETROFIT/REPLACEMENT Carrier WarrantyApplications NEW ConstructionApplications Application ConsiderationsUndersizing OversizingFan Cycle Switch Dual options Product Overview 52P and 52CProduct Features and Benefits 52P and 52C Quiet OperationMost Efficient Performance Efficient FAN MotorNO-RUST Weather Last Wall Sleeve and Front Panel Removable Front PanelANTI-THEFT Knobs Product Features and Benefits TWO-PIECE Lifetime Indoor FilterWashable Vent AIR Filter BI-DIRECTIONAL Discharge GrillePower Cord for 265-V Units BI-MOLDED Condenser ShroudSnow Baffle Easy Access to Chassis Temperature Limiter and Control KnobFan Cycle Switch Hidden ControlsEnhanced Copper Tubing Seamless BasepanCondensate Drain Valve Condensate Removal SystemSpecial Features Heat Pumps PAY Their OWN WAYHow The Heat Pump Works Heat Pump Energy Savings Cooling Electric Premium Zone CapacityOrdering Data 52P and 52C NumberFACTORY-INSTALLED Options 52P and 52C Wall Thermostat Control RC,RPCorrosion Protection CP,RP FIELD-INSTALLED Accessories 52P and 52C Wall SleevesInsulated Metal Wall Sleeves Wall Sleeve Molding KitFriedrich and ZoneAire Retro- fit Wall Sleeve Adapter Climate Master Wall Sleeve AdapterFIELD-INSTALLED Accessories 52P and 52C Outdoor GrillesAluminum Architectural Outdoor Grilles Louvered Polymeric Architectural Outdoor Grilles LouveredHardwire Kit Outdoor Grille SelectionConduit Interface Kit Subbase Non-electrical subbaseSubbase Power Disconnect Switch Leveling legsSubbase Fuse Kit Thermostats Digital Programmable ThermostatNon-Programmable Thermostat Manual Changeover Wall ThermostatWall Thermostat Interface Retrofit Kit Speed Fan Control from Wall ThermostatThermostat Locking Cover Condensate Drain Kit Lateral Duct KitPower Vent with Power Door Kit Lateral Air DeflectorCurtain Deflector Security Door KitReplacement Filters Energy Management KitDimension Drawings and Installation Data NEW Construction Typical Wall Installation208/230-V Units Dimension Drawings and Installation Data NEW Construction Typical Wall Installation Minimum Clearance for Indoor Outdoor Discharge AIR Typical Lateral Duct Installation 52P and 52C with Subbase Electrical ConnectionsWall Thermostat Connections Product Data 52P Model 52PQ 230/208-1-60Model 52PQ CAPACITY* Btuh52PQ Rev. Cycle 265Product Data 52P Model 52PC and PE 230/208-1-60Model 52PC and PE Product Data 52C Model 52CQ 230/208-1-60Cooling Heating 52CQ Rev. CycModel 52CQ Heating Cooling 52CQ Rev. CycleProduct Data 52C Model 52CE 230/208-1-60Heating† Cooling 52CEModel 52CE 52CE VoltsExpanded Ratings Data 52P and 52C Cooling PerformanceEvaporator entering air temp. 80 F Evap. air 260 CFM Evaporator entering air temp. 80 F Evap. air 350 CFMCooling Performance Cooling Sensible Heat Factors SHF AT 80 F Indoor DBEvaporator entering air temp. 80 F Evap. air 320 CFM Sound Data 52P and 52C Indoor Sound Data 52P and 52CSound Transmission Class STC = Wiring Diagrams 52P and 52C SLSWiring Diagrams 52P and 52C ‘R’ 24 VAC Output Power to Wall ‘C’ Common ThermostatPage Wiring Diagrams 52P and 52C Following are recommended wire sizes Maximum Length ftMaster Ptac Unit O C ’STAT Guide Specifications Hvac Guide SpecificationsGuide Specifications Page Typical Warranty CarrierCarrier Corporation Accessory List Accessory Form Number Part Number Description

592-085 specifications

The Carrier 592-085 is a leading-edge commercial air conditioning unit designed to provide efficient cooling solutions for various business environments. Known for its reliability, performance, and advanced technology, the Carrier 592-085 has become a popular choice among facility managers and HVAC professionals alike.

One of the primary features of the Carrier 592-085 is its impressive cooling capacity, which can handle large spaces with ease. The unit operates effectively in various climates, maintaining optimal indoor temperatures even during the hottest summer months. With a cooling capacity rating of 8.5 tons, it can accommodate medium to large commercial spaces, ensuring comfort for employees and customers.

The unit is equipped with advanced inverter technology, which allows it to adjust cooling output based on real-time demand. This not only enhances energy efficiency but also leads to significant cost savings over time. The inverter-driven compressor operates silently, reducing noise levels without compromising on performance.

In addition to its energy-efficient capabilities, the Carrier 592-085 features highly innovative refrigerant management. The unit uses R-410A refrigerant, which is environmentally friendly and contributes to reducing ozone depletion. This makes it an ideal choice for businesses looking to minimize their ecological footprint while maintaining effective cooling.

The Carrier 592-085 also boasts durable construction, with weather-resistant materials designed to withstand harsh external conditions. This ensures longevity and reduces maintenance needs in the long run. The unit's design also includes access panels for convenient servicing, making it easier for technicians to perform routine maintenance and repairs.

Moreover, the Carrier 592-085 is compatible with advanced building management systems, allowing for seamless integration into existing operations. Features such as remote monitoring and control provide users with the flexibility to manage their HVAC systems efficiently, enhancing overall operational efficiency.

In summary, the Carrier 592-085 stands out in the commercial air conditioning market due to its robust performance, energy efficiency, and advanced features. From its inverter technology to eco-friendly refrigerant usage and durable design, this unit provides a comprehensive solution for those seeking reliable cooling in commercial settings. It represents a smart investment for businesses that prioritize both comfort and sustainability.
Top Page Image Contents