Carrier 592-085 warranty NO-RUST Weather Last Wall Sleeve and Front Panel, Removable Front Panel

Page 7

NO-RUST WEATHER LAST™ WALL SLEEVE AND FRONT PANEL

The indoor front panel and polymer wall sleeve use nonmetallic compounds that never rust or corrode, do not support combustion, and do not give off toxic fumes. The weather-resistant feature exceeds require- ments of Underwriters’ Laboratories and resists dam- age caused by impact and scratching. The Weather Last feature also insulates and has up to 10 times the acoustic absorption of metal cabinets.

Insulated polymer wall sleeves combine all of the above features with factory-installed insulation. The insulation helps to reduce heat loss, save energy, pro- vide better sound absorption, and reduce the risk of sleeve sweating.

Carrier’s metal wall sleeves are available in a variety of sizes for most standard and deep wall applications. All metal wall sleeves come with factory-installed insulation, designed to minimize heat loss and reduce outdoor noise transmissions into the room.

REMOVABLE FRONT PANEL

The louvered front panel fits firmly onto the chassis and features easy removal for service. It provides front air intake to enhance performance and quiet operation. It also allows the option of flush mounting PTAC unit to the floor. If desired, the front panel can be secured to the unit with field-supplied screws. The 2 locking screws (if installed) are located behind the removable filter handles.

ANTI-THEFT KNOBS

The anti-theft knobs are captured underneath the front panel of the unit to prevent the knobs from being removed or stolen.

Standard Wall Sleeve (Polymer)

42 in.

16 in.

14/18/24/26/28 in.

Standard and Deep Wall Sleeve (Metal)

REMOVABLE

LOCATION OF

LOCKING SCREW

FILTER

REMOVED FILTER

(NOTE: 2nd LOCKING SCREW

 

 

IS LOCATED BEHIND

 

 

2nd FILTER)

Removable Front Panel

TEMPERATURE

 

MODE

 

 

 

OFF

 

 

LO

LO

 

 

HI

HI

WARMER

COOLER

HEAT

COOL

 

 

 

FAN

Anti-Theft Knobs

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Architects and ENGINEERS’ Manual ContentsPage NEW Construction RETROFIT/REPLACEMENTCarrier Warranty ApplicationsOversizing ApplicationsApplication Considerations UndersizingProduct Overview 52P and 52C Fan Cycle Switch Dual optionsEfficient FAN Motor Product Features and Benefits 52P and 52CQuiet Operation Most Efficient PerformanceRemovable Front Panel NO-RUST Weather Last Wall Sleeve and Front PanelANTI-THEFT Knobs BI-DIRECTIONAL Discharge Grille Product Features and BenefitsTWO-PIECE Lifetime Indoor Filter Washable Vent AIR FilterBI-MOLDED Condenser Shroud Power Cord for 265-V UnitsSnow Baffle Hidden Controls Easy Access to ChassisTemperature Limiter and Control Knob Fan Cycle SwitchCondensate Removal System Enhanced Copper TubingSeamless Basepan Condensate Drain ValveHeat Pumps PAY Their OWN WAY Special FeaturesHow The Heat Pump Works Cooling Electric Premium Zone Capacity Heat Pump Energy SavingsNumber Ordering Data 52P and 52CWall Thermostat Control RC,RP FACTORY-INSTALLED Options 52P and 52CCorrosion Protection CP,RP Wall Sleeves FIELD-INSTALLED Accessories 52P and 52CClimate Master Wall Sleeve Adapter Insulated Metal Wall SleevesWall Sleeve Molding Kit Friedrich and ZoneAire Retro- fit Wall Sleeve AdapterPolymeric Architectural Outdoor Grilles Louvered FIELD-INSTALLED Accessories 52P and 52COutdoor Grilles Aluminum Architectural Outdoor Grilles LouveredOutdoor Grille Selection Hardwire KitConduit Interface Kit Non-electrical subbase SubbaseLeveling legs Subbase Power Disconnect SwitchSubbase Fuse Kit Manual Changeover Wall Thermostat ThermostatsDigital Programmable Thermostat Non-Programmable ThermostatSpeed Fan Control from Wall Thermostat Wall Thermostat Interface Retrofit KitThermostat Locking Cover Lateral Duct Kit Condensate Drain KitSecurity Door Kit Power Vent with Power Door KitLateral Air Deflector Curtain DeflectorEnergy Management Kit Replacement FiltersTypical Wall Installation Dimension Drawings and Installation Data NEW Construction208/230-V Units Dimension Drawings and Installation Data NEW Construction Typical Wall Installation Minimum Clearance for Indoor Outdoor Discharge AIR Typical Lateral Duct Installation Electrical Connections 52P and 52C with SubbaseWall Thermostat Connections Model 52PQ 230/208-1-60 Product Data 52P265 Model 52PQCAPACITY* Btuh 52PQ Rev. CycleModel 52PC and PE 230/208-1-60 Product Data 52PModel 52PC and PE Rev. Cyc Product Data 52CModel 52CQ 230/208-1-60 Cooling Heating 52CQHeating Cooling 52CQ Rev. Cycle Model 52CQ52CE Product Data 52CModel 52CE 230/208-1-60 Heating† Cooling52CE Volts Model 52CEEvaporator entering air temp. 80 F Evap. air 350 CFM Expanded Ratings Data 52P and 52CCooling Performance Evaporator entering air temp. 80 F Evap. air 260 CFMCooling Sensible Heat Factors SHF AT 80 F Indoor DB Cooling PerformanceEvaporator entering air temp. 80 F Evap. air 320 CFM Indoor Sound Data 52P and 52C Sound Data 52P and 52CSound Transmission Class STC = SLS Wiring Diagrams 52P and 52C‘R’ 24 VAC Output Power to Wall ‘C’ Common Thermostat Wiring Diagrams 52P and 52CPage Wiring Diagrams 52P and 52C Maximum Length ft Following are recommended wire sizesMaster Ptac Unit O C ’STAT Hvac Guide Specifications Guide SpecificationsGuide Specifications Page Carrier Typical WarrantyCarrier Corporation Accessory Form Number Part Number Description Accessory List

592-085 specifications

The Carrier 592-085 is a leading-edge commercial air conditioning unit designed to provide efficient cooling solutions for various business environments. Known for its reliability, performance, and advanced technology, the Carrier 592-085 has become a popular choice among facility managers and HVAC professionals alike.

One of the primary features of the Carrier 592-085 is its impressive cooling capacity, which can handle large spaces with ease. The unit operates effectively in various climates, maintaining optimal indoor temperatures even during the hottest summer months. With a cooling capacity rating of 8.5 tons, it can accommodate medium to large commercial spaces, ensuring comfort for employees and customers.

The unit is equipped with advanced inverter technology, which allows it to adjust cooling output based on real-time demand. This not only enhances energy efficiency but also leads to significant cost savings over time. The inverter-driven compressor operates silently, reducing noise levels without compromising on performance.

In addition to its energy-efficient capabilities, the Carrier 592-085 features highly innovative refrigerant management. The unit uses R-410A refrigerant, which is environmentally friendly and contributes to reducing ozone depletion. This makes it an ideal choice for businesses looking to minimize their ecological footprint while maintaining effective cooling.

The Carrier 592-085 also boasts durable construction, with weather-resistant materials designed to withstand harsh external conditions. This ensures longevity and reduces maintenance needs in the long run. The unit's design also includes access panels for convenient servicing, making it easier for technicians to perform routine maintenance and repairs.

Moreover, the Carrier 592-085 is compatible with advanced building management systems, allowing for seamless integration into existing operations. Features such as remote monitoring and control provide users with the flexibility to manage their HVAC systems efficiently, enhancing overall operational efficiency.

In summary, the Carrier 592-085 stands out in the commercial air conditioning market due to its robust performance, energy efficiency, and advanced features. From its inverter technology to eco-friendly refrigerant usage and durable design, this unit provides a comprehensive solution for those seeking reliable cooling in commercial settings. It represents a smart investment for businesses that prioritize both comfort and sustainability.
Top Page Image Contents