Carrier 592-085 warranty Product Overview 52P and 52C, Fan Cycle Switch Dual options

Page 5

PRODUCT OVERVIEW (52P AND 52C)

This section summarizes product features covered in detail in later sections of this manual:

2 AIR

2-WAY

WIRE SCREEN FRESH AIR

BI-MOLDED

THERMOSTAT WITH

MODE

COPPER TUBE

ROTARY

FILTERS

DISCHARGE

CONTROL

CONDENSER

TEMPERATURE

SELECTION

ALUMINUM

COMPRESSORS

 

GRILLE

ARM

SHROUD

LIMITER

SWITCH

FIN COILS

 

 

 

 

ACCESS TO ELECTRICAL

 

 

LOUVERED

CONTROL

INDOOR COMPONENTS THROUGH

BASEPAN FOR

WALL

FRONT

DOOR

COIL

CONTROL BOX DOOR

CONDENSATE

SLEEVE

PANEL

 

PLUG TEST/

 

REMOVAL

 

 

 

 

 

 

RESET BUTTONS

Polymer, Metal or Extended Wall Sleeve — Designed for rugged duty, acoustic absorption, and attractive appearance for years to come.

Rotary Compressors — Provide quiet, reliable operation.

Copper Tube Aluminum Fin Coils — Enhanced coils provide durability, high performance, and ease of operation. Fresh Air Control Arm — Allows outdoor air into room through vent filter for improved air quality.

Fan Cycle Switch — Dual options:

(1)Continuous fan operation.

(2)Cycle fan ON and OFF with compressor operation.

Thermostat with Temperature Limiter — Provides improved temperature control with a temperature limiter that allows tempera- ture range restraints for the unit by making a simple adjustment.

Anti-Theft Knobs — Provides protection against theft of the thermostat knob and the mode selection knob. Control Door — Provides protection for controls and enhances appearance.

Easy Access to Electrical Components — Simply remove two screws and drop down the control box door. Improved Condensate Removal — Minimizes condensate water on outside of building.

New Two-Piece Filter Design — Provides improved air filtration and can be removed easily for cleaning. Durable Discharge Grille — Made of polycarbonate; holds up under the toughest conditions.

Louvered Front Panel — Made of high impact polystyrene. Provides improved performance and quiet operation. Mode Selection Switch — Rotary switch allows for easy selection of operating mode.

Bi-Molded Condenser Shroud — The two-piece condenser shroud allows easy access for service and maintenance to the out- door coil and other components.

Power Cord Protection — Power cord for the 230/208-v unit provides power cord protection.

5

Image 5
Contents Architects and ENGINEERS’ Manual ContentsPage Carrier Warranty RETROFIT/REPLACEMENTApplications NEW ConstructionApplication Considerations ApplicationsUndersizing OversizingProduct Overview 52P and 52C Fan Cycle Switch Dual optionsQuiet Operation Product Features and Benefits 52P and 52CMost Efficient Performance Efficient FAN MotorANTI-THEFT Knobs NO-RUST Weather Last Wall Sleeve and Front PanelRemovable Front Panel TWO-PIECE Lifetime Indoor Filter Product Features and BenefitsWashable Vent AIR Filter BI-DIRECTIONAL Discharge GrilleSnow Baffle Power Cord for 265-V UnitsBI-MOLDED Condenser Shroud Temperature Limiter and Control Knob Easy Access to ChassisFan Cycle Switch Hidden ControlsSeamless Basepan Enhanced Copper TubingCondensate Drain Valve Condensate Removal SystemHow The Heat Pump Works Special FeaturesHeat Pumps PAY Their OWN WAY Cooling Electric Premium Zone Capacity Heat Pump Energy SavingsNumber Ordering Data 52P and 52CCorrosion Protection CP,RP FACTORY-INSTALLED Options 52P and 52CWall Thermostat Control RC,RP Wall Sleeves FIELD-INSTALLED Accessories 52P and 52CWall Sleeve Molding Kit Insulated Metal Wall SleevesFriedrich and ZoneAire Retro- fit Wall Sleeve Adapter Climate Master Wall Sleeve AdapterOutdoor Grilles FIELD-INSTALLED Accessories 52P and 52CAluminum Architectural Outdoor Grilles Louvered Polymeric Architectural Outdoor Grilles LouveredConduit Interface Kit Hardwire KitOutdoor Grille Selection Non-electrical subbase SubbaseSubbase Fuse Kit Subbase Power Disconnect SwitchLeveling legs Digital Programmable Thermostat ThermostatsNon-Programmable Thermostat Manual Changeover Wall ThermostatThermostat Locking Cover Wall Thermostat Interface Retrofit KitSpeed Fan Control from Wall Thermostat Lateral Duct Kit Condensate Drain KitLateral Air Deflector Power Vent with Power Door KitCurtain Deflector Security Door KitEnergy Management Kit Replacement Filters208/230-V Units Dimension Drawings and Installation Data NEW ConstructionTypical Wall Installation Dimension Drawings and Installation Data NEW Construction Typical Wall Installation Minimum Clearance for Indoor Outdoor Discharge AIR Typical Lateral Duct Installation Electrical Connections 52P and 52C with SubbaseWall Thermostat Connections Model 52PQ 230/208-1-60 Product Data 52PCAPACITY* Btuh Model 52PQ52PQ Rev. Cycle 265Model 52PC and PE 230/208-1-60 Product Data 52PModel 52PC and PE Model 52CQ 230/208-1-60 Product Data 52CCooling Heating 52CQ Rev. CycHeating Cooling 52CQ Rev. Cycle Model 52CQModel 52CE 230/208-1-60 Product Data 52CHeating† Cooling 52CE52CE Volts Model 52CECooling Performance Expanded Ratings Data 52P and 52CEvaporator entering air temp. 80 F Evap. air 260 CFM Evaporator entering air temp. 80 F Evap. air 350 CFMEvaporator entering air temp. 80 F Evap. air 320 CFM Cooling PerformanceCooling Sensible Heat Factors SHF AT 80 F Indoor DB Sound Transmission Class STC = Sound Data 52P and 52CIndoor Sound Data 52P and 52C SLS Wiring Diagrams 52P and 52C‘R’ 24 VAC Output Power to Wall ‘C’ Common Thermostat Wiring Diagrams 52P and 52CPage Wiring Diagrams 52P and 52C Maximum Length ft Following are recommended wire sizesMaster Ptac Unit O C ’STAT Hvac Guide Specifications Guide SpecificationsGuide Specifications Page Carrier Typical WarrantyCarrier Corporation Accessory Form Number Part Number Description Accessory List

592-085 specifications

The Carrier 592-085 is a leading-edge commercial air conditioning unit designed to provide efficient cooling solutions for various business environments. Known for its reliability, performance, and advanced technology, the Carrier 592-085 has become a popular choice among facility managers and HVAC professionals alike.

One of the primary features of the Carrier 592-085 is its impressive cooling capacity, which can handle large spaces with ease. The unit operates effectively in various climates, maintaining optimal indoor temperatures even during the hottest summer months. With a cooling capacity rating of 8.5 tons, it can accommodate medium to large commercial spaces, ensuring comfort for employees and customers.

The unit is equipped with advanced inverter technology, which allows it to adjust cooling output based on real-time demand. This not only enhances energy efficiency but also leads to significant cost savings over time. The inverter-driven compressor operates silently, reducing noise levels without compromising on performance.

In addition to its energy-efficient capabilities, the Carrier 592-085 features highly innovative refrigerant management. The unit uses R-410A refrigerant, which is environmentally friendly and contributes to reducing ozone depletion. This makes it an ideal choice for businesses looking to minimize their ecological footprint while maintaining effective cooling.

The Carrier 592-085 also boasts durable construction, with weather-resistant materials designed to withstand harsh external conditions. This ensures longevity and reduces maintenance needs in the long run. The unit's design also includes access panels for convenient servicing, making it easier for technicians to perform routine maintenance and repairs.

Moreover, the Carrier 592-085 is compatible with advanced building management systems, allowing for seamless integration into existing operations. Features such as remote monitoring and control provide users with the flexibility to manage their HVAC systems efficiently, enhancing overall operational efficiency.

In summary, the Carrier 592-085 stands out in the commercial air conditioning market due to its robust performance, energy efficiency, and advanced features. From its inverter technology to eco-friendly refrigerant usage and durable design, this unit provides a comprehensive solution for those seeking reliable cooling in commercial settings. It represents a smart investment for businesses that prioritize both comfort and sustainability.