I.C.T.C. Holdings Corporation 300S Legend owner manual Important Safety Precautions

Page 4

IMPORTANT SAFETY PRECAUTIONS

WARNING

Material issuing from the spray tip is at high pressure. If fingers, or any part of the body are placed near the tip of the spray gun, it is possible that the spray could break the skin and inject some of the spray material. If injury does occur, seek immediate attention of a medical doctor. Be prepared to inform the doctor what fluid was injected, if the injury is of an injection nature. Equipment and chemicals when used improperly can be dangerous!

ýNEVER place any part of the body in front of the spray tip or aim the gun toward any part of the body.

ýNEVER point the gun toward any individual.

ýNEVER treat any injury as a simple cut. If injury does occur, seek immediate medical attention. Be prepared to inform the doctor what fluid was injected.

ýNEVER allow another person to use the sprayer unless he is thoroughly instructed on its operation and has read all safety precautions in this manual and all safety warning labels attached to unit.

ýNEVER use around children.

ýNEVER attempt to perform any maintenance or service on any part of the unit spray system without first;

1.Shutting off the unit.

2.Disconnecting the power cord from the outlet.

3.Relieving all pressure in the pump by triggering the gun.

4.Locking gun trigger in "LOCKED" position, with gun locked closed.

ýNEVER operate the sprayer without the tip guard complete and in place.

ýNEVER spray any material in the vicinity of open flame, pilot lights, electrical outlets or any other source of ignition.

ýNEVER spray volatile materials with flash points lower than 140 F (60 C).

ýNEVER attempt to stop any leakage in the paint line or at any fitting with your hand or any part of your body. Immediately shut off the unit should leakage occur.

ýNEVER wash an electric motor, nor operate it in the rain or in wet or damp areas, to protect yourself from electric shock.

ýNEVER allow paint hose to become kinked, or to vibrate against rough or sharp surfaces.

ýNEVER operate the unit at pressures higher than the pressure rating of the lowest rated component in the system, or at pressure higher than factory preset.

ýNEVER spray in an enclosed area. The spraying area must be well ventilated to safely remove chemical vapors.

ýNEVER operate the unit with worn or damaged accessories, or with accessories other than those supplied by H.E.R.O. Industries, unless the accessories have been first specifically approved in writing by H.E.R.O. Industries.

ýNEVER allow the unit to be serviced or repaired anywhere other than an authorized H.E.R.O. Service Center, or with other than genuine H.E.R.O. parts or components.

ýNEVER leave unit unattended without first shutting off, triggering the gun to relieve all pump pressure, and setting the trigger lock on gun in "LOCKED" position, with gun locked closed.

H.E.R.O. INDUSTRIES

4

300S / 300SL LEGEND Owner’s Manual

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Airless Spray Equipment R.O. Warranty R.O. IndustriesTable of Contents Important Safety Precautions Always AlwaysOperating Instructions R.O. Airless Spray PaintingRead this Manual Thoroughly Setting UP to Spray Flushing the Unit AT Shutdown Or Color Change Special Storage InstructionsSpecial Notes and Instructions Airless Spray Painting Suggestions and Technique For Excellent RESULTS, Read and Practice These TechniquesPoor Good Tailing Good Pattern Fog, Over Spray Spray TIP Replacement TIP Size For ApplicationOrifice Size FAN WidthGPM Coatings Filter Orifice Viscosity Mesh SizeTroubleshooting Hydraulic Intake Valve REF# 62 Paint Intake Valve Assembly REF#Hydraulic Outgo Valve REF# 73, 4-27C Paint Outgo Valve REF# 22, 4-11A Prime Valve REF# 34, 4-606 NEWPressure Test Electric Motor Wont START/RUN Electric Motor STALLS/QUITSNo PRESSURE, Blue Hydraulic Fluid in Paint Puddle of OIL Appearing Under Sprayer During Operation Sprayer does not Prime with Paint Sprayer does not Prime with Correct ThinnerSpray Material Leaks AT Prime Valve Stem Spray Material Leaks OUT Prime Valve Hose with Valve ClosedSpray Pattern is Spotty or Uneven Spray Pattern Leaves Lines or FingersReplacement of Intake Seat Tools or Supplies RequiredOutgo Valve Special NotesBleed Valve Repair Kit Installation Repair of Bleed ValveDiaphragm Replacement Hydraulic Head Insert Replacement Piston Repairs Piston Repairs Pressure Control Valve Accessories Description QTY Parts ListAssy Diaphragm Assembly KITHydraulic Parts Drive Parts 300SL only Chassis Parts Parts Schematic 300S / 300SL Legend 300SLIndustries 300S / 300SLR.O. Industries 2719 Lake City WAY BURNABY, B.C Canada

300S Legend specifications

I.C.T.C. Holdings Corporation has earned a distinct reputation in the aviation industry with its flagship product, the 300S Legend. This advanced aircraft represents a significant leap forward in design and technology, combining performance, comfort, and cutting-edge features.

One of the most notable characteristics of the 300S Legend is its impressive aerodynamic efficiency. This aircraft incorporates a sleek fuselage design paired with advanced wing technologies, which contribute to enhanced stability and fuel efficiency. The wings are crafted from lightweight composite materials, enabling the 300S Legend to achieve superior lift during takeoff and landing.

The cockpit of the 300S Legend is a testament to modern aviation engineering. It is equipped with a state-of-the-art avionics suite that includes touchscreen displays, providing pilots with intuitive controls and easy access to flight data. The integration of advanced navigation systems ensures precise routing and enhanced safety, allowing pilots to operate the aircraft with confidence in various weather conditions.

In terms of performance, the 300S Legend is powered by cutting-edge engines that deliver exceptional thrust while minimizing fuel consumption. This not only extends the aircraft's range but also reduces operational costs, making it an attractive choice for commercial operators. The powerplant features advanced noise reduction technologies, ensuring compliance with stringent environmental regulations and providing a quieter cabin experience for passengers.

The interior of the 300S Legend is designed with passenger comfort in mind. The cabin boasts spacious seating arrangements, with customizable configurations to suit different missions, whether it be corporate travel or cargo transport. Large windows provide ample natural light, creating an inviting and comfortable atmosphere. The use of premium materials and finishes further enhances the overall experience, making travel not only efficient but also enjoyable.

Safety is paramount in the design of the 300S Legend, which is equipped with redundant systems and advanced safety features that meet and exceed regulatory requirements. Enhanced turbulence prediction systems and advanced autopilot functionalities contribute to a secure flying experience, ensuring that both passengers and crew are protected throughout the journey.

In conclusion, I.C.T.C. Holdings Corporation's 300S Legend combines innovative technologies with outstanding design to redefine the standards of modern aviation. Its commitment to performance, safety, and passenger comfort positions it as a leading choice for those seeking a versatile and reliable aircraft.
Top Page Image Contents