I.C.T.C. Holdings Corporation 300S Legend owner manual Always

Page 5

ALWAYS

þALWAYS follow H.E.R.O. recommendations for operation and safety completely.

þALWAYS ensure that switch is in off position before plugging in the electric motor.

þALWAYS set trigger lock on gun in "LOCKED" position when not in use, with gun locked close.

þALWAYS check connections and fittings for tightness before operating the unit.

þALWAYS locate the unit in a well ventilated area a minimum of 25 feet from the spray area.

þALWAYS ground the unit, the paint containers, and the object being sprayed to eliminate static discharge. Ensure that all these objects remain grounded throughout the entire spraying operation.

þALWAYS use approved 3 prong grounded extension cord and approved grounded outlets of the voltage and frequency specified on the motor. The outlet must be at least 25 feet from the spraying area.

þALWAYS use approved 3 prong grounded extension cord not less than # 12/3 gauge up to 50 feet, and not less than # 10/3 gauge up to 100 feet. DO NOT exceed 100 feet of extension cord.

þALWAYS use accessories and components approved for at least 3000 psi (working pressure) in the spraying system.

þALWAYS use accessories and components supplied by H.E.R.O. Industries, or specifically approved in writing by H.E.R.O. Industries on with the unit

þALWAYS examine accessories for wear or damage before operating the unit

þALWAYS use lowest possible pressure when flushing and cleaning the unit, and hold the gun firmly against a metal container to reduce static discharge possibility.

þALWAYS wear a face filter mask when operating the unit.

þALWAYS ;

1.Turn off the motor

2.Disconnect the power cord from the outlet.

3.Relieve all pressure in the pump by triggering the gun.

4.Lock gun trigger in "LOCKED" position, with gun locked closed before attempting to perform any maintenance or service on any part of the unit spray system.

þALWAYS wear safety glasses when operating the unit.

þALWAYS ensure fire extinguishing equipment is readily available and properly maintained in the spray area.

þALWAYS observe good housekeeping and keep the spray area free from obstructions.

þALWAYS be aware that certain chemicals may react with aluminum, carbide, or other components in the pump system. Read the manufacturer's label on all materials to be sprayed, and follow the manufacturer's recommendations. If in doubt, consult your material supplier to be sure.

H.E.R.O. INDUSTRIES

5

300S / 300SL LEGEND Owner’s Manual

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Airless Spray Equipment R.O. Industries R.O. WarrantyTable of Contents Important Safety Precautions Always AlwaysRead this Manual Thoroughly R.O. Airless Spray PaintingOperating Instructions Setting UP to Spray Special Storage Instructions Flushing the Unit AT Shutdown Or Color ChangeSpecial Notes and Instructions For Excellent RESULTS, Read and Practice These Techniques Airless Spray Painting Suggestions and TechniquePoor Good Tailing Good Pattern Fog, Over Spray TIP Size For Application Spray TIP ReplacementOrifice Size FAN WidthCoatings Filter Orifice Viscosity Mesh Size GPMTroubleshooting Hydraulic Outgo Valve REF# 73, 4-27C Paint Intake Valve Assembly REF#Hydraulic Intake Valve REF# 62 Prime Valve REF# 34, 4-606 NEW Paint Outgo Valve REF# 22, 4-11APressure Test Electric Motor STALLS/QUITS Electric Motor Wont START/RUNNo PRESSURE, Blue Hydraulic Fluid in Paint Puddle of OIL Appearing Under Sprayer During Operation Sprayer does not Prime with Correct Thinner Sprayer does not Prime with PaintSpray Material Leaks OUT Prime Valve Hose with Valve Closed Spray Material Leaks AT Prime Valve StemSpray Pattern is Spotty or Uneven Spray Pattern Leaves Lines or FingersTools or Supplies Required Replacement of Intake SeatSpecial Notes Outgo ValveRepair of Bleed Valve Bleed Valve Repair Kit InstallationDiaphragm Replacement Hydraulic Head Insert Replacement Piston Repairs Piston Repairs Pressure Control Valve Accessories Assy Parts ListDescription QTY KIT Diaphragm AssemblyHydraulic Parts Drive Parts 300SL only Chassis Parts 300SL Parts Schematic 300S / 300SL Legend300S / 300SL IndustriesR.O. Industries 2719 Lake City WAY BURNABY, B.C Canada

300S Legend specifications

I.C.T.C. Holdings Corporation has earned a distinct reputation in the aviation industry with its flagship product, the 300S Legend. This advanced aircraft represents a significant leap forward in design and technology, combining performance, comfort, and cutting-edge features.

One of the most notable characteristics of the 300S Legend is its impressive aerodynamic efficiency. This aircraft incorporates a sleek fuselage design paired with advanced wing technologies, which contribute to enhanced stability and fuel efficiency. The wings are crafted from lightweight composite materials, enabling the 300S Legend to achieve superior lift during takeoff and landing.

The cockpit of the 300S Legend is a testament to modern aviation engineering. It is equipped with a state-of-the-art avionics suite that includes touchscreen displays, providing pilots with intuitive controls and easy access to flight data. The integration of advanced navigation systems ensures precise routing and enhanced safety, allowing pilots to operate the aircraft with confidence in various weather conditions.

In terms of performance, the 300S Legend is powered by cutting-edge engines that deliver exceptional thrust while minimizing fuel consumption. This not only extends the aircraft's range but also reduces operational costs, making it an attractive choice for commercial operators. The powerplant features advanced noise reduction technologies, ensuring compliance with stringent environmental regulations and providing a quieter cabin experience for passengers.

The interior of the 300S Legend is designed with passenger comfort in mind. The cabin boasts spacious seating arrangements, with customizable configurations to suit different missions, whether it be corporate travel or cargo transport. Large windows provide ample natural light, creating an inviting and comfortable atmosphere. The use of premium materials and finishes further enhances the overall experience, making travel not only efficient but also enjoyable.

Safety is paramount in the design of the 300S Legend, which is equipped with redundant systems and advanced safety features that meet and exceed regulatory requirements. Enhanced turbulence prediction systems and advanced autopilot functionalities contribute to a secure flying experience, ensuring that both passengers and crew are protected throughout the journey.

In conclusion, I.C.T.C. Holdings Corporation's 300S Legend combines innovative technologies with outstanding design to redefine the standards of modern aviation. Its commitment to performance, safety, and passenger comfort positions it as a leading choice for those seeking a versatile and reliable aircraft.
Top Page Image Contents