4. | Operation Mode | 8 | ||
| ∙ | Display Panel | 8 | |
| ∙ | Bar Graph Display | 8 | |
| ∙ | Sensitivity Control Dial | 8 | |
|
| ∙ Sensitivity / Volume Adjust | 8 | |
|
| ∙ | Frequency Adjust | 9 |
| ∙ | Yellow Store Button | 9 | |
|
| ∙ | Store a Reading | 9 |
|
| ∙ Overwrite Data or Enter Data In a New Location | 9 | |
| ∙ | Text Editor | 10 | |
5. | Setup Mode | 10 | ||
| ∙ | Data Transfer | 10 | |
| ∙ Set Time & Date | 11 | ||
| ∙ | dB Scale Select | 11 | |
| ∙ | dB Offset Val(Value) (This is a Reference dB Level) | 12 | |
| ∙ | Display Mode | 12 | |
| ∙ | Calibration Due Date | 13 | |
| ∙ | Text Editor | 13 | |
| ∙ | Factory Defaults | 13 | |
| ∙ | Exit To Program | 14 | |
6. | User Instructions | 14 | ||
| ∙ | Trisonic- Scanning Module | 14 | |
| ∙ Method of Airborne Detection | 14 | ||
| ∙ | Headset | 14 | |
| ∙ | Rubber Focusing Probe | 14 | |
| ∙ | Stethoscope Module | 14 | |
| ∙ | Stethoscope Extension Kit | 14 | |
| ∙ | Charging The UP9000 | 14 | |
| ∙ | Warble Tone Generator | 15 | |
| ∙ Charging The Warble Tone Generator | 15 | ||
| ∙ | Helpful Hints | 15 | |
| ∙ | Auto Shutdown Battery Feature | 15 | |
| ∙ Resetting The On Board Computer | 15 | ||
7. | Applications |
| ||
| Leak Detection, How to Locate Leaks, Shielding Techniques, Low Level Leaks | |||
| Tone Test (Ultratone) | |||
| Electric Arc, Corona, Tracking Detection | |||
| Monitoring Bearing Wear | 21 | ||
| Detecting Bearing Failure | 22 | ||
| Comparative & Historical Testing | 22 | ||
| Lack of Lubrication | 23 | ||
| Over Lubrication | 23 | ||
| Slow Speed Bearings | 23 | ||
| FFT Interface | 23 | ||
| General Mechanical Trouble Shooting | 24 | ||
| Locating Faulty Steam Traps | 25 | ||
| Traps: Inverted Bucket, Float & Thermostatic, Thermodynamic, Thermostatic | 26 | ||
| Inspecting Valves | 27 | ||
| ABCD Method | 28 | ||
| Leakage Behind Walls | 29 | ||
| Partial Blockage | 29 | ||
| Flow Direction | 29 | ||
| Ultrasound Technology | 30 | ||
| Instructions for Setting Combination Lock On Carrying Case | 31 | ||
2