Bosch Power Tools 13618, 13614, 13624 manual Battery/Charger

Page 4

Do not use dull or damaged bits and accessories. Dull or damaged bits have a greater tendency to bind in the workpiece.

When removing the bit from the tool avoid contact with skin and use proper protective gloves when grasping the bit or accessory. Accessories may be hot after prolonged use.

Check to see that keys and adjusting wrenches are removed from the drill before switching the tool "ON". Keys or wrenches can fly away at high velocity striking you or a bystander.

Do not run the tool while carrying it at your side. A spinning drill bit could become entangled with clothing and injury may result.

!WARNING Some dust created by power sanding, sawing,

grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints,

Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically- treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Battery/Charger

Before using battery charger, read all instructions and cautionary markings on

(1)battery charger, (2) battery pack, and

(3)product using battery.

Use only the charger which accompanied your product or direct replacement as listed in the catalog or this manual. Do not substitute any other charger. Use only Bosch approved chargers with your product. See Functional Description and Specifications.

Do not disassemble charger or operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Replace damaged cord or plugs immediately. Incorrect reassembly or damage may result in electric shock or fire.

Do not recharge battery in damp or wet environment. Do not expose charger to rain or snow. If battery case is cracked or otherwise damaged, do not insert into charger. Battery short or fire may result.

Charge only Bosch approved rechargeable batteries. See Functional Description and Specifications. Other types of batteries may burst causing personal injury and damage.

Charge battery pack in temperatures above +40 degrees F (4 degrees C) and below +105 degrees F (41 degrees C).

Store tool and battery pack in locations where temperatures will not exceed 120 degrees F (49 degrees C). This is important to prevent serious damage to the battery cells.

Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with skin and eyes. The battery liquid is caustic and could cause chemical burns to tissues. If liquid comes in contact with skin, wash quickly with soap and water, then with lemon juice or vinegar. If the liquid contacts your eyes, flush them with water for a minimum of 10 minutes and seek medical attention.

Place charger on flat non-flammable surfaces and away from flammable materials when re-charging battery pack. The charger and battery pack heat during charging. Carpeting and other heat insulating surfaces block proper air circulation which may cause overheating of the charger and battery pack. If smoke or melting of the case are observed unplug the charger immediately and do not use the battery pack or charger.

Use of an attachment not recom- mended or sold by Bosch may result in a risk of fire, electric shock or injury to persons.

-4-

Image 4
Contents Read Before Using Lire avant usage Leer antes de usar General Safety Rules For All Battery Operated ToolsSafety Rules for Cordless Hammer Drills ServiceBattery/Charger Battery Care Battery DisposalNICKEL-CADMIUM Batteries NICKEL-METAL Hydride BatteriesSymbols Functional Description and Specifications Cordless Hammer DrillsTool ChargerOperating Instructions Installing Chuck Releasing and Inserting Battery PackCharging Battery Pack 1 Hour Charger Removing ChuckOperating Tips Drilling Metal Drill BitsDrilling Wood Drilling MasonryMaintenance Accessories CleaningCertain cleaning agents ! Caution and solvents damage Disconnect the tool and/orConsignes générales de sécurité Pour tous les outils à pile Aire de travailSécurité électrique Sécurité des personnesRéparation Vos vêtements, ce qui pourrait causer des blessures Chargeur de pileLe plomb provenant des peintures à base de plomb Entretien des piles Mise au rebut des pilesNe tentez pas de Piles NICKEL-CADMIUMSymboles Description fonctionnelle et spécifications OutilChargeur 13 mm #14 x 101 mm 19 mm 44 mm 57 mmConsignes de fonctionnement Retrait DU Mandrin Pose DU MandrinDépose ET Repose DU BLOC-PILES Charge DU BLOC-PILE Chargeur DE 1 HeureConsignes de fonctionnement Fixation ’AIDE DE VIS ForetsPerçage DU Bois Perçage DES MétauxEntretien Accessoires NettoyageCertains Agents Et certainsConserve Estas Instrucciones Personales gravesNormas de seguridad para taladros de percusión sin cordón ServicioBatería/cargador Cuidado de las baterías Eliminación de las bateríasBaterías DE NIQUEL-CADMIO Baterías DE NIQUEL-HIDRURO MetalicoCon aislamiento doble SímbolosDe Ni-Cd Descripción funcional y especificaciones Taladros de percusión sin cordónHerramienta CargadorInstrucciones de funcionamiento Desmontaje DEL Mandril Instalacion DEL MandrilLiberacion E Insercion DEL Paquete DE Baterías Carga DEL Paquete DE Baterías Cargador DE 1 HoraConsejos de funcionamiento Notas Importantes Para CargarGancho Para Atadura Taladrado CON Velocidad VariableBrocas Para Taladro Taladrado DE MaderaTaladrado DE Metal Taladrado DE MamposteriaMantenimiento ServicioAccesorios LimpiezaPara evitar Desconecte Siempre laPage Remarques Notas Limited Warranty of Bosch Portable and Benchtop Power Tools