Bostitch BTC440LB instruction manual Wire Size AWG, Description Catalog #

Page 5

When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Recommended Minimum Wire Size for Extension Cords

Total Length of Cord

75 ft.

100 ft.

125 ft.

150 ft.

175 ft.

25 ft.

50 ft.

7.6m 15.2 m 22.9 m 30.5 m 38.1 m 45.7 m 53.3 m

Wire Size AWG

18 18 16 16 14 14 12

 

FUNCTIONAL DESCRIPTION

A

 

 

 

Figure A

 

 

 

 

1.

Trigger switch

 

 

 

 

2.

Forward/Reverse button

4

 

 

 

3.

Chuck collar

3

 

 

 

4.

1/4 inch hex quick-release chuck

5

 

2

 

5.

LED Work light

 

 

1

 

 

6.

Bit tip holder

 

 

 

 

7.

Battery

 

 

 

 

8.

Battery Release Button

8

 

 

 

(on battery)

 

 

 

 

 

 

 

 

 

6

 

 

 

 

7

 

 

 

 

This product uses the battery and charger listed in the chart below.

 

 

 

Description

 

Catalog #

 

 

 

 

 

 

 

 

 

 

18V Lithium-Ion Battery:

 

BTC480L

 

 

 

18V Lithium-Ion Charger:

 

BTC490L, BTC492L

 

 

 

 

 

 

 

 

 

Important Safety Instructions for Battery Chargers SAVE THESE INSTRUCTIONS: This manual contains important safety instructions for battery chargers.

WARNING: Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.

Shock hazard. Do not allow any liquid to get inside charger.

Burn hazard. To reduce the risk of injury, charge only designated BOSTITCH batteries. Other types of batteries may burst causing personal injury and damage.

Under certain conditions, with the charger plugged in to the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.

These chargers are not intended for any uses other than charging designated BOSTITCH rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.

Do not expose charger to rain or snow.

5

Image 5
Contents 18v Save all warnings and instructions for future reference Safety Guidelines DefinitionsWork Area Safety Specific Safety Rules Beats per minute SymbolsDescription Catalog # Wire Size AWGREAD ALL Instructions Important Safety Instructions for Battery PacksCharger Diagnostics Charging ProcedureBad Battery Hot/Cold Pack DelayOperating Instructions Installing and Removing the Battery Pack From the ToolTroubleshooting Replacement Parts Service and Repairs Accessories MaintenanceThree Year Limited Warranty Lignes directrices en matière de sécurité définitions Visseuse à perceuse sans fil dePage Consignes de sécurité particulières Porter UN Équipement DE Protection Homologué Description De cat SymbolesCalibre AWG Description fonctionnelle Figure a Conserver CES Directives Lire toutes les directives Recommandations en matière de rangementDirectives de sécurité importantes pour les blocs-piles Procédure de charge Fonctions de diagnostic du chargeurPile en mauvais état Remarques importantes pour le chargementInsertion et retrait du bloc-piles de l’outil Bouton de commande marche avant/ marche arrière Fig. EFonctionnement Détente à vitesse variable fig. DLampe de travail à DEL fig. F Avertissement Avant de changerMandrin à blocage rapide FIG. G Rangement des mèchesEntretien ET Réparation EntretienPièces de rechange Garantie Limitée DE Trois ANS AccessoiresBTC440 Page Normas de seguridad específicas Símbolos Tamaño AWG del conductor Lea todas las instrucciones Batería en mal estado Procedimiento de cargaDiagnóstico del cargador Notas importantes sobre la carga Retraso por paquete caliente/fríoDejar la batería en el cargador Instrucciones de operación El sello Rbrc Problema Causa posible Solución posible Detección de problemasMantenimiento Piezas DE Repuesto Mantenimiento Y ReparacionesGarantía Limitada DE Tres Anos Accesorios