Campbell Hausfeld WF1900, WF1800 Model WF2000, For Information About, This Product

Operating Instructions and Parts Manual Model WF2000

				23
		25	30
		24
						33			33
			26	29	28
								15
			27
				28		34
				Inside
17	18		22	39
	19
	20	21
				31		ON
							LOW
			13			OFF	H	IGH
					CH
									LAST
									TO	DUTY
									BUILT
							10		SERIOUS
						10, 11

	For Information About
	This Product
34	Call 1-800-746-5641
14	1
12	35		37
	38
32	36	7	2
9
	4	6
8	5

	Figure 21 - Model WF2000			16
			Replacement Parts
	Ref.
	No.		Description	Part Number	Qty
1			Torch assembly and hose	WC600900AJ	1
2			Torch body, front and back	WC600201AV	1
3		▲	Hanger clip	WC600003AV	1
4			Nozzle	WT502100AV	1
5			Contact tip - 0.035” (0.9 mm)	WT501400AV	1
			Optional contact tip - 0.030” (0.8 mm)
			(4-pack)	WT501300AJ		†
			Optional contact tip - 0.035” (0.9 mm)
			(4-pack)	WT501400AJ		†
6			Trigger	WC600202AV	1
7			Torch contact spring	WC600203AV	1
8			Work clamp (Cord not included)	WC100300AV	1
9			Welding cable 8 AWG (6 ft)	❋	1
10			Wire speed knob	WC400201AV	1
11		▲	Wire speed control board (inside)	WC402100AV	1
12			Low/high switch	WC400300AV	1
13			On/off switch	WC400000AV	1
14			Safety decal	DK670100AV	1
15			Handle	WC300100AV	1
16			Power cord 14-3 AWG (6 ft) Type SJT	❋	1
17			Spool spindle	WC500300AV	1
18			M4.8-1.6 x 10 mm Sheet
			metal screw	❋	2
19			Optional flux-core wire .030” (0.8 mm)
			2 lbs.	WE200001AV		†
			10 lbs.	WE201000AV		†
			Optional flux-core wire .035” (0.9 mm)
			2 lbs.	WE200501AV		†
			10 lbs.	WE201500AV		†

Ref.
No.	Description	Part Number	Qty
20	Spool adapter	WC500200AV	1
21	Spool spring	WC500101AV	1
22	Spool locking hub	WC500100AV	1
23	Drive deck assembly
	(Includes Nos.24 - 30)	WC500000AV	1
24	Tension spring	WC500003AV	1
25	Tension screw	WC500002AV	1
26	Roller, .6 - .9mm	WC500001AV	1
27	Roller cover	WC500004AV	1
28	M4.2-1.4 x 35 mm Sheet
	metal screw	❋	3
29	Swing arm roller	WC500007AV	1
30	Swing arm	WC500005AV	1
31	Side panel	WC700000AV	1
32	Strain relief	WC102000AV	2
33	M8 -1.25 x 20 mm Machine screw	❋	2
34	Handle cap	WC300101AV	2
35	Liner, coated metal	WC600208AV	1
36	Swan neck w/diffuser	WC600701AV	1
37	Valve body	WC600204AV	1
38	Trumpet liner	WC600305AV	1
39	Torch ring	WC600009AV	1
40	▲ Handshield (lens not included)	WC801300AV	1
41	▲ Shaded lens (for handshield)	WC801100AV	1
42	▲ Chipping hammer/brush	WC803000AV	1

▲Not Shown

†Optional accessory, sold separately

❋Standard hardware item, available at local hardware or welder supply store

www.chpower.com

12