Soft brush
Holding jig
NOTE
When removing the holding jig from the polishing unit, lift the holding jig up so the ferrules do not touch the polishing film.
Step 9 Clean the holding jig and the tips of the ferrules under running water using the brush. After cleaning, clean the brush, removing all polishing grit or
Ferrule tip | other matter. |
| |
Water | NOTE |
| |
| There is no problem if washing is |
| done in the washing container, |
| but using running water is |
| preferred. |
Step 10 Take the ferrules out of the holding jig, undo the wire ties, wash the ferrule tips with water and dry the tips of the ferrules with cleaning paper.
Step 11 Clean | the ferrules | with |
cleaning | paper and | ethyl |
alcohol. Clean the surface of the polishing film with cleaning paper and water.
NOTE
Do not leave any polishing fluid on the polishing film because the polishing fluid can dry on the polishing film, scratching the ferrules if the film is used again. If polishing will not be done for a period of time, keep the polishing film immersed in water so that any polishing fluid on it will not dry.
4 - 12