PREFACE
This manual has been prepared to provide the information necessary to allow the user to operate the OFL-12 Mass Production Polisher (hereafter referred to as OFL-
12)correctly and fully utilize its functions. Before using the OFL-12, be sure to read this instruction manual thoroughly. Store the manual in a safe place for future reference.
NOTE
The OFL-12 can only polish ferrules which meet the following conditions:
| Ferrule material | Zirconia (ZrO2) |
| Ferrule diameter | 2.5 mm (0.0984 inch) |
The OFL-12 can polish ferrules after assembly only with ST-type connectors. Please contact SII for options if you wish to polish almina ceramic capillary ferrules, ferrules with different outer diameter, ferrules that require flat, angled PC, or another style of polishing.
NOTE
The polishing film and polishing fluid used on the OFL-12 are selected especially for the processes performed on the OFL-12. If you use any other polishing film or fluid, we cannot guarantee that the polishing specifications will be met.