English

As appropriate, wear dust mask, hearing protectors, gloves and workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high intensity noise may cause hearing loss.

•Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.

•Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control.

•Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body.

•Regularly clean the power tool’s air vents. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.

•Do not operate the power tool near flammable materials. Sparks could ignite these materials.

•Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

•DO NOT use wire brushes with this surface grinding shroud.

•DO NOT use abrasive wheels.

•DO NOT grind or cut metal with a diamond cup wheel. Fragments could loosen and fly apart.

•ALWAYS use with a dust collector.

WARNING: When not in use, place grinder on a stable surface where it will not move inadvertantly, roll or cause a tripping or falling hazard. Serious personal injury may result.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS wear certified safety equipment:

•ANSI Z87.1 eye protection (CAN/CSA Z94.3).

•ANSI S12.6 (S3.19) hearing protection.

•NIOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Before beginning the work, check to determine the hazard classification of the dust produced. Use an industrial dust extractor vacuum of the appropriate, officially approved

DWE46150 specifications

The DeWalt DWE46150 is a powerful and versatile wall cutter designed for professionals in the construction and renovation industries. This tool is engineered for precision and efficiency, making it an ideal choice for cutting through a variety of materials, including brick, masonry, and concrete. One of the standout features of the DWE46150 is its robust motor, which delivers exceptional power and durability. With a 15-amp motor, this wall cutter is capable of handling the toughest cutting tasks, providing reliable performance even under strenuous conditions.

Another notable characteristic of the DWE46150 is its innovative dust extraction system. This technology helps to maintain a cleaner work environment by minimizing dust and debris, which is crucial for both visibility and health. The dust port is designed to be compatible with most standard vacuum systems, ensuring that users can keep their workspace tidy and reduce the risks associated with respiratory exposure to fine dust particles.

The DWE46150 also boasts a unique adjustable depth control feature. This allows users to precisely set the cutting depth according to their specific needs, enhancing both accuracy and consistency in cuts. Whether you're making shallow cuts for minor renovations or deeper cuts for more extensive modifications, this adaptability makes the tool a valuable asset on any job site.

Additionally, the wall cutter is equipped with a comfortable, ergonomic handle that reduces fatigue during extended use. The well-balanced design makes it manageable and easy to maneuver, giving users greater control while cutting. Safety is also a priority in the design of the DWE46150, featuring an electric brake that stops the blade quickly when the trigger is released, minimizing the risk of accidental injuries.

The DWE46150 is compatible with a range of specialty blades that can be easily swapped out depending on the material being cut, further enhancing its versatility. Overall, the DeWalt DWE46150 wall cutter is a powerful, efficient, and user-friendly tool that meets the demanding needs of professionals, making it an essential addition to any contractor's arsenal. Its combination of power, precision, and innovative features positions it as a standout choice in the market for wall cutting solutions.