DeWalt DWE46150 Edging Use Application Fig, Maintenance, Replace Brush Skirt Fig

Page 9

Edging Use Application (Fig. 1)

This concrete grinding shroud has a door feature to allow flush grinding against a wall.

1.Turn off the tool and disconnect from the power source.

2.Using the edging door tab (C), rotate the edging door until it snaps into the open postion.

3.Connect the tool to the power source.

4.Position hands and body away from wheel and door opening.

5.Place the door edge flush to work surface, turn the tool on and begin grinding. Remove the tool from work surface before turning the tool off.

7.When flush grinding is complete, turn off the tool and disconnect from power source. Allow the tool to stop rotating before laying it down.

8.Using the edging door tab (C), rotate door until it snaps into the closed position.

MAINTENANCE

WARNING: To reduce the risk of injury, ALWAYS turn off tool and disconnect the tool from the power source before making any adjustments or removing or installing attachments or accessories. This applies to both the grinder and the dust extractor vacuum. Such preventative safety measures reduce the risk of starting the tool accidentally.

Replace Brush Skirt (Fig. 1)

1.Turn off the tool and disconnect from power source.

2.Push worn brush skirt from brush skirt removal holes (D).

3.Press new brush skirt into brush skirt removal holes until secure. Replacement brush skirts are available at extra cost from your local dealer or authorized service center. If you need assistance in locating

any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT (1-800- 433-9258) or visit our website: www.dewalt.com.

Cleaning

WARNING: Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye protection when performing this.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Accessories

WARNING: Since accessories, other than those offered by DEWALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DEWALT recommended accessories should be used with this product.

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or visit our website: www.dewalt. com.

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by a DEWALT factory service center, a DEWALT authorized service center or other qualified service personnel. Always use identical replacement parts.

English

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Guide Dutilisation Manual DE Instrucciones Page Definitions Safety Guidelines General Safety WarningsSave ALL Warnings and Instructions For Future Reference Surface Grinding Shroud Safety Rules Power Tool USE and CareService English Intended USE AssemblyMounting and Removing Surface Grinding Shroud Mounting Dry Diamond Surface Cup Wheels FigDust Extraction Traditional Dust Extractor Vacuum Hoses OperationCleaning Accessories Repairs MaintenanceEdging Use Application Fig Replace Brush Skirt FigThree Year Limited Warranty Year Free ServiceDAY Money Back Guarantee Consignes générales de sécurité Définitions lignes directrices en matière de sécuritéSécurité DU Lieu DE Travail Sécurité EN Matière D’ÉLECTRICITÉRéparation Utilisation ET Entretien D’UN Outil ÉlectriqueFrançais Français Usage Prévu Remarque vérifier que la connexion tuyau est fiable DépoussiérageUtilisation Applications bordures FigTuyaux D’ASPIRATEUR Traditionnels Remplacement de la jupe de brosse Fig AccessoiresNettoyage Garantie limitée de trois ans RéparationsContrat D’ENTRETIEN Gratuit D’UN AN Garantie DE Remboursement DE 90 JoursAdvertencias generales sobre seguridad Definiciones Normas de SeguridadSeguridad EN EL Área DE Trabajo Seguridad EléctricaMantenimiento USO Y Mantenimiento DE LA Herramienta EléctricaSiempre use un colector de polvo Sustituible USO Debido Cierre la palanca de abrazadera para asegurar la cubierta Extracción de polvoMangueras Tradicionales DE LA Aspiradora Extractora DE Polvo FuncionamientoMantenimiento Aplicación de uso en perfiles FigCambio del faldón de escobilla Fig LimpiezaReparaciones Póliza de GarantíaPara Otras Localidades Garantía limitada por tres años ExcepcionesAÑO DE Servicio Gratuito Page

DWE46150 specifications

The DeWalt DWE46150 is a powerful and versatile wall cutter designed for professionals in the construction and renovation industries. This tool is engineered for precision and efficiency, making it an ideal choice for cutting through a variety of materials, including brick, masonry, and concrete. One of the standout features of the DWE46150 is its robust motor, which delivers exceptional power and durability. With a 15-amp motor, this wall cutter is capable of handling the toughest cutting tasks, providing reliable performance even under strenuous conditions.

Another notable characteristic of the DWE46150 is its innovative dust extraction system. This technology helps to maintain a cleaner work environment by minimizing dust and debris, which is crucial for both visibility and health. The dust port is designed to be compatible with most standard vacuum systems, ensuring that users can keep their workspace tidy and reduce the risks associated with respiratory exposure to fine dust particles.

The DWE46150 also boasts a unique adjustable depth control feature. This allows users to precisely set the cutting depth according to their specific needs, enhancing both accuracy and consistency in cuts. Whether you're making shallow cuts for minor renovations or deeper cuts for more extensive modifications, this adaptability makes the tool a valuable asset on any job site.

Additionally, the wall cutter is equipped with a comfortable, ergonomic handle that reduces fatigue during extended use. The well-balanced design makes it manageable and easy to maneuver, giving users greater control while cutting. Safety is also a priority in the design of the DWE46150, featuring an electric brake that stops the blade quickly when the trigger is released, minimizing the risk of accidental injuries.

The DWE46150 is compatible with a range of specialty blades that can be easily swapped out depending on the material being cut, further enhancing its versatility. Overall, the DeWalt DWE46150 wall cutter is a powerful, efficient, and user-friendly tool that meets the demanding needs of professionals, making it an essential addition to any contractor's arsenal. Its combination of power, precision, and innovative features positions it as a standout choice in the market for wall cutting solutions.
Top Page Image Contents