English
safety class that is in compliance with your local dust hazard control regulations.
WARNING: Always wear proper personal hearing protection. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
COMPONENTS (FIG. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result. |
|
A. Dust port | E. Edging door |
B. Clamp adjusting screw | F. Edging door tab |
C. Replaceable brush skirt | G. Clamping lever |
D.Brush skirt removal hole
FIG. 1
G
A
F |
E 
D | B |
C
INTENDED USE
Your concrete surface grinding shroud has been designed for dust removal of the following: grinding, leveling and polishing concrete surfaces. It can remove dust when removing surface paint, epoxy and glue. Using the appropriate grinder, diamond grinding wheel and dust extractor vacuum it can be used to remove the vast majority of static and airborne dust which without the use of the surface grinding shroud could otherwise contaminate the working environment or pose an increased health risk to the operator and those in close proximity. This concrete surface grinder should ALWAYS be used with a dust extractor vacuum designed for concrete dust removal.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
The surface grinding shroud is a professional tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.
Recommended power tools to be used with this attachment are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any power tool, please contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call
ASSEMBLY (FIG. 1, 2)
WARNING: To reduce the risk of injury, ALWAYS turn off the tool and disconnect the tool from the power source before making any adjustments or removing or installing attachments or accessories. This applies to both the grinder and the dust extractor vacuum. Such preventative safety measures reduce the risk of starting the tool accidentally.
4