Mounting and Removing Surface Grinding Shroud

Mounting and Removing Surface Grinding Shroud

1.	Follow the mounting and removing guard instructions in tool
	manual to remove the guard from grinder.
2.	Open the clamp lever (G) on the surface grinding shroud and align
	the tabs (H) on the surface grinding shroud with the slots (I) on the
	grinder gear case.

NOTICE: If surface grinding shroud cannot be tightened by the clamp adjusting screw, do not use the tool and take the tool and surface grinding shroud to a service center to repair or replace the surface grinding shroud.

5.To remove the surface grinding shroud, open the clamp lever, rotate the surface grinding shroud to align the slots and tabs and pull up on the surface grinding shroud.

English

3. With the clamp lever open, rotate the shroud into the desired

working position. The surface grinding shroud should be

positioned between the spindle and the operator to provide

operator protection.

FIG. 2

H	B
I

4. Close the clamp lever to secure the surface grinding shroud on the

gear case. Tighten the clamp adjusting screw (B) to ensure shroud

is secured to gear case.

Mounting Dry Diamond Surface Cup Wheels (Fig. 3)

Follow the mounting and using cutting wheels instructions in the tool manual and mount the grinding wheel. DO NOT use Type 1 cutting wheels or bonded abrasive wheels.

Dry diamond surface cup (J) wheels are recommended for use with this shroud. The inner flange washer (K) should be installed behind the wheel allowing free tool removal and proper fit.

Dust Extraction (Fig. 1, 4)

FIG. 3

For optimal positioning, the diamond wheel should ride above the

brushes 1/8" (3.18 mm). If diamond wheel rides inside the shroud

or stands taller than 1/4" (6.35 mm) the shroud will not work

properly.

NOTICE: Do not tighten the clamp adjusting screw (B) with the clamp lever in open position. Undetectable damage to the surface grinding shroud or the mounting hub may result.

WARNING: Use only power tools recommended by DEWALT with this attachment.

For more information about DEWALT power tools compatible with this attachment, please contact your local dealer, call 1-800-4-DEWALT (1-800-433-9258) or visit our website www.dewalt.com.