Cisco Systems CSACS1121K9 manual Hardware Features, Single Radio Operation, Ethernet Port

Chapter 1 Overview

Hardware Features

Hardware Features

This section describes the access point features. Refer to Appendix C, “Access Point Specifications,” for a list of access point specifications.

Key hardware features of the 1100 series access point include:

•Single Radio Operation, page 1-3

•Ethernet Port, page 1-3

•LEDs, page 1-4

•Power Sources, page 1-4

•UL 2043 Certification, page 1-5

•Anti-Theft Features, page 1-5

Figure 1-1shows the location of some of the hardware features of the access point.

Figure 1-1 Access Point Layout and Connectors

1 2 3 4 5 6

81180

1	48-VDC power port	4	Mode button
2	Ethernet port (RJ-45)	5	Status LEDs
3	Cable lock slot	6	Antenna

Single Radio Operation

The access point contains a 2.4-GHz radio (IEEE 802.11b-compliant or IEEE 802.11g-compliant) in a mini-PCI slot and two 2.2-dBi dipole integrated antennas. You can perform a field upgrade to the mini-PCI radio and antennas to support new radio technologies, such as the 2.4-GHz

IEEE 802.11g-compliant radio.

Ethernet Port

The auto-sensing Ethernet port accepts an RJ-45 connector, linking the access point to your 10BASE-T or 100BASE-T Ethernet LAN. The access point can receive power through the Ethernet cable from a power injector, switch, or power patch panel. The Ethernet MAC address is printed on the label on the back of the access point.

Cisco Aironet 1100 Series Access Point Hardware Installation Guide

OL-4309-07 1-3