Appendix C Access Point Specifications
Table | Access Point Specifications (continued) | |||||
|
|
|
| |||
Category |
|
| Specifications | |||
|
|
| ||||
Typical Range |
| Indoor (across office cubicle walls): | ||||
|
|
| IEEE | |||
|
|
| (maximum output power) | |||
|
|
|
| 400 ft (121.9 m) at 1 Mbps | ||
|
|
|
| 150 ft (45.7 m) at 11 Mbps | ||
|
|
| IEEE | |||
|
|
| (maximum output power) | |||
|
|
|
| 410 ft ( 125.0 m) at 1 Mbps | ||
|
|
|
| 270 ft ( 82.3 m) at 2 Mbps | ||
|
|
|
| 220 ft ( 67.1 m) at 5.5 Mbps | ||
|
|
|
| 160 ft ( 48.8 m) at 11 Mbps | ||
|
|
|
| 300 ft ( 91.4 m) at 6 Mbps | ||
|
|
|
| 210 ft (67.1 m) at 12 Mbps | ||
|
|
|
| 180 ft (54.9 m) at 18 Mbps | ||
|
|
|
| 90 ft ( 27.4 m) at 54 Mbps | ||
|
| Outdoor: | ||||
|
|
| IEEE | |||
|
|
| (maximum output power) | |||
|
|
|
| 2000 ft (609.6 m) at 1 Mbps | ||
|
|
|
| 800 ft (243.8 m) at 11 Mbps | ||
|
|
| IEEE | |||
|
|
| (maximum output power) | |||
|
|
|
| 2000 ft (609.6 m) at 1 Mbps | ||
|
|
|
| 1000 ft (304.8 m) at 11 Mbps | ||
|
|
|
| 1300 ft (396.2 m) at 6 Mbps | ||
|
|
|
| 600 ft (182.9 m) at 18 Mbps | ||
|
|
|
| 250 ft (76.2 m) at 54 Mbps | ||
|
|
| Note Using 2.2dBi antennas at the access point and the client adapter. | |||
|
|
| ||||
Antenna |
| A diversity system with two integrated 2.2 dBi dipole antennas. | ||||
|
|
| ||||
Compliance |
| The1100 seriesaccesspointprovidesadequatefireresistanceand low | ||||
|
| sm | ||||
|
| environm entalairspace,suchasabovesuspendedceilings,inaccordancewith | ||||
|
|
| Section | |||
|
| |||||
|
|
|
|
|
|
|
|
|
| Caution Only the | |||
|
|
|
|
| tested to UL 2043 for operation in a building’s environmental air | |
|
|
|
|
| space; no other power injectors or power modules have been tested | |
|
|
|
|
| to UL 2043 and they should not be placed in a building’s | |
|
|
|
|
| environmental air space, such as above suspended ceilings. | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
| ||
|