Cisco Systems quick start Chassis ground connector on the Cisco ASR 1004 Router

Figure 6 Chassis Ground Lug Location on the Cisco ASR 1004 Router

1

1

Chassis ground connector on the Cisco ASR 1004 Router

	SPA-4XOC3-POS
	3
	2
	1
	0
	SPA-4XOC3-POS
	3
SPA-4XOC3-POS	2
3	1
2	0
1
0	SPA-4XOC3-POS
SPA-4XOC3-POS
3	3
2	2
1	1
0	0
	SPA-4XOC3-POS
	3
SPA-4XOC3-POS	2
3	1
2	0
1
0
SPA-4XOC3-POS
3
2
1
0

						LINK	AUX
							CON
				HD	CARRIER	BITS	MGMT ETHERNET
				USB
		CRIT
PWR	ACTV	MAJ		DF
				DISK
STAT	STBY	MIN	0	1
ASR1000-RP1

280179

Use the following procedure to attach the grounding lug to the chassis ground connector on your chassis:

Step 1 Use the wire stripper to strip one end of the AWG #6 wire approximately 0.75 inches (19.05 mm). Step 2 Insert the AWG #6 wire into the wire receptacle on the grounding lug.

Step 3 Use the crimping tool to carefully crimp the wire receptacle around the wire; this step is required to ensure a proper mechanical connection.

Step 4 Attach the grounding lug with the wire on the left to avoid having the grounding wire overlapping the power supply. Figure 7 shows how to attach the grounding screws.

Figure 7 Attaching a Grounding Lug to the Cisco ASR 1004 Router Chassis Ground Connector

4

3

2 1

280034

1	Chassis earth ground studs and lead wire	3	Earth ground connector on the chassis
2	Grounding screws	4	Earth ground symbol

11