90519813 VPX1101 Screwdriver 7/11/07 8:47 AM Page 11
but not so much that you crack the brittle material. A smooth, even flow of dust indicates the proper drilling rate.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
| TROUBLESHOOTING |
|
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Battery pack not installed properly. | • Checkbatterypack |
|
| installation. |
| • Battery pack not charged. | • Check battery pack |
|
| charging requirements. |
•Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into charger until red LED appears.
• Charger not plugged in. | • Plug charger into a working |
| outlet. Refer to “Important |
| Charging Notes” for more |
| details. |
| • If chargers are daisy chained |
| together check all connections. |
| • Check current at receptacle |
| by plugging in a lamp or other |
| appliance. |
| • Check to see if receptacle |
| is connected to a light |
| switch which turns power off |
| when you turn out the lights. |
• Surrounding air temperature. | • Move charger and battery |
| to a surrounding air |
| temperatureofabove40 |
| degrees F (4,5°C) or below |
| 105 degrees F (+40,5°C). |
• Battery pack too hot or too cold. | •The charger will not |
| charge a battery pack if the |
| cell temperature is below |
| approximately 32°F (0°C) |
| or above 140°F (60°C). |
| The battery pack should be |
| left in the charger and the |
| charger will begin to charge |
| automatically when the cell |
| temperature warms up or |
| cools down. |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
11