Troubleshooting power supply units
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
Troubleshooting power source problems
1.Press the power button to ensure that your system is turned on. If the power indicator does not light up when the power button is pressed, press the power button firmly.
2.Plug in another working device to ensure that the system board is not faulty.
3.Ensure that no loose connections exist. For example, loose power cables.
4.Ensure that the power source meets applicable standards.
5.Ensure that there are no short circuits.
6.Have a qualified electrician check the line voltage to ensure that it meets the required specifications.
Troubleshooting power supply unit problems
1.Ensure that no loose connections exist. For example, loose power cables.
2.Ensure that the AC power source is properly connected to the PSU.
NOTE: If the 1600 W PSU is installed, ensure that it is connected to a 220 V AC power source.
3.Ensure that the PSU handle/LED indicates that the PSU is working properly.
For more information on PSU indicators, see Redundant power supply indicator codes.
4.If you have recently upgraded your system, ensure that the PSU has enough power to support the new system.
You may have to upgrade to a higher wattage power supply unit.
5.If you have a redundant PSU configuration, ensure that both the power supply units are of the same type and wattage.
6.Ensure that you use only PSUs with the Extended Power Performance (EPP) label on the back.
7.Remove and install the PSU.
NOTE: After installing a PSU, allow several seconds for the system to recognize the PSU and determine if it is working properly.
If the problem persists, see Getting Help.
158
