Next steps
1.Connect the GPU signal and power cables to the system board.
2.Follow the procedure listed in After working inside your system.
3.While booting, press <F2> to enter System Setup and ensure that the battery is operating properly.
4.Enter the correct time and date in the System Setup Time and Date fields.
5.Exit System Setup.
Related References
System board connectors
Related Tasks
Installing a GPU riser cable on the system board
Installing a processor blank
PCIe shroud
Removing the PCIe shroud
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
Steps
Lift the PCIe shroud away from the system.
74
