Installing a heat sink | 70 |
System battery | 72 |
Replacing the system battery | 72 |
PCIe shroud | 74 |
Removing the PCIe shroud | 74 |
Installing the PCIe shroud | 75 |
Expansion card riser and expansion cards | 76 |
Expansion card installation guidelines | 76 |
Removing the expansion card riser | 78 |
Installing the expansion card riser | 79 |
Removing expansion cards | 80 |
Installing expansion cards | 81 |
Expansion card cabling diagrams | 83 |
Power supply units | 85 |
Hot Spare feature | 85 |
Removing the power supply unit blank | 86 |
Installing the power supply unit blank | 87 |
Removing an AC power supply unit | 87 |
Installing an AC power supply unit | 88 |
Hard drives | 89 |
Removing the optional 2.5 inch hard drive cage | 89 |
Installing the optional 2.5 inch hard drive cage | 90 |
Removing the optional 2.5 inch hard drive cage cover | 91 |
Installing the optional 2.5 inch hard drive cage cover | 92 |
Removing 2.5 inch cabled hard drives from the hard drive cage | 93 |
Installing a 2.5 inch cabled hard drive into the hard drive cage | 95 |
Hard drive cabling diagrams | 97 |
uSATA SSDs | 99 |
Removing a 1.8 inch uSATA SSD blank | 99 |
Installing a 1.8 inch uSATA SSD blank | 100 |
Removing a 1.8 inch uSATA SSD carrier | 100 |
Installing a 1.8 inch uSATA SSD carrier | 101 |
Removing a 1.8 inch uSATA SSD from a SSD carrier | 102 |
Installing a 1.8 inch uSATA SSD into a SSD carrier | 103 |
Removing the 1.8 inch uSATA SSD cage | 104 |
Installing the 1.8 inch uSATA SSD cage | 105 |
Removing the 1.8 inch uSATA SSD backplane | 105 |
Installing the 1.8 inch uSATA SSD backplane | 106 |
Internal USB memory key (optional) | 107 |
Replacing the internal USB key | 107 |
Cable routing clip | 108 |
Removing the cable routing clip | 108 |
5