Steps
1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
2. Secure the I/O bracket to the GPU by using the screws.
3. Align the screw holes on the support bracket with the screw holes on the GPU.
4. Secure the support bracket to the GPU by using the screws.
Next steps
Install the custom GPU brackets on the replacement GPU.
Related Tasks
Installing the custom GPU brackets on the replacement GPU
Installing the custom GPU brackets on the replacement GPU
The Nvidia and Intel replacement GPUs are shipped with specific Nvidia and Intel I/O and Support
brackets. These brackets should be removed from the replacement Nvidia or Intel GPU(s) and installed on
the GPU(s) removed from your system. The procedure to install the custom Nvidia or Intel brackets on
the replacement GPUs is identical.
Prerequisites
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Keep the Phillips #1 and #2 screwdrivers ready.
3. Install the GPU brackets on the GPU removed from your system. For more information, see Installing
the GPU brackets on the GPU removed from your system.
Steps
1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
2. Secure the I/O bracket to the GPU by using the screws.
3. Align the screw holes on the support bracket with the screw holes on the GPU.
4. Secure the support bracket to the GPU by using the screws.
Next steps
Install the GPU cable riser board.
Related Tasks
Installing a GPU riser cable board
Installing a GPU riser cable board
Prerequisites
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be
performed only by Dell certified service technicians.
130