Steps
1. Remove the screws securing the cable routing clip to the system board.
2. Lift the cable routing clip away from the system board.
Figure 42. Removing and installing the cable routing clip
1. cable routing clip 2. screw (2)
3. screw hole on the system board (2)
Installing the cable routing clip
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Align the screw holes on the cable routing clip with the screw holes on the system board and lower
the clip on the system board.
2. Secure the cable routing clip to the system board by using the screws.
Next steps
1. Connect and route the cables through the cable routing clip.
2. Follow the procedure listed in After working inside your system.
109