Figure 32. Removing and installing a 2.5 inch cabled hard drive (hard drive 0/E and hard drive 1/F) from the hard drive cage
1.hard drive 1/F
3.power and signal cable connector on hard drive
5.screw (8)
2.power and signal cable connector (2)
4.hard drive 0/E
6.hard drive cage
3.If you want to remove hard drives 2/C and 3/D, perform the following steps:
a.Remove hard drives 0/E and 1/F.
b.Disconnect the signal/power cables from hard drive 2/C and 3/D.
c.Remove the signal/power cables routed through the cable clip on the hard drive cage.
d.Lift hard drive 2/C out of the hard drive cage.
e.Slide hard drive 3/D out of the hard drive cage.
94
