Steps
1. Locate the SD card slot on the internal dual SD module.
NOTE: The slot is keyed to ensure correct insertion of the card.
2. Orient the SD card appropriately and insert the contact-pin end of the card into the slot.
3. Press the card into the card slot until it locks into place.
Next steps
Follow the procedure listed in After working inside your system.
Removing the internal dual SD module Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Locate the internal dual SD module (IDSDM) on the system board.
2. If installed, remove the SD card(s). For more information, see Removing an internal SD card.
Temporarily label each SD card with its corresponding slot before removal. Install the SD card(s) into
the same slots.
3. Hold the pull tab and pull the dual SD module out of the system board.
47