DeWalt DWS535 instruction manual Blades, Kickback, Teeth Application, Improper Workpiece Support

Page 13

Lower Blade Guard

WARNING: The lower blade guard is a safety feature which reduces the risk of serious personal injury. Never use the saw if the lower guard is missing, damaged, misassembled or not working properly. Do not rely on the lower blade guard to protect you under all circumstances. Your safety depends on following all warnings and precautions as well as proper operation of the saw. Check lower guard for proper closing before each use as outlined in Safety Instructions for All Saws. If the lower blade guard is missing or not working properly, have the saw serviced before using. To assure product safety and reliability, repair, maintenance and adjustment should be performed by an authorized service center or other qualified service organization, always using identical replacement parts.

Blades

WARNING: To minimize the risk of eye injury, always use eye protection. Carbide is a hard but brittle material. Foreign objects in the work piece such as wire or nails can cause tips to crack or break. Only operate saw when proper saw blade guard is in place. Mount blade securely in proper rotation before using, and always use a clean, sharp blade.

CAUTION: Do not cut ferrous metals (steel), masonry, glass, masonry-type planking, cement board or tile with this saw.

Do not use abrasive wheels or blades. A dull blade will cause slow, inefficient cutting resulting in overload to the saw motor, excessive splintering and could increase the possibility of kickback. Please refer to the following table to determine the correct size replacement blade for your model saw.

 

 

DWS535, DWS535T

 

 

Blade

Diameter

Teeth

Application

 

DW3592B10

7-1/4"

18

General Purpose

 

DW3578B10

(184 mm)

24

Wood Cutting

 

DW3576B10

7-1/4"

36

Plywood Cutting

 

DW3526

(184 mm)

140

 

 

DW3578B10

7-1/4"

24

Laminated or

 

 

(184 mm)

 

engineered lumber

If you need assistance regarding blades, please call 1-800-4-DeWALT (1-800-433-9258).

Kickback

Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator. If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the operator.

Kickback is more likely to occur when any of the following conditions exist.

1.IMPROPER WORKPIECE SUPPORT

A.Sagging or improper lifting of the cut off piece can cause pinching of the blade and lead to kickback (Fig. 14).

B.Cutting through material supported at the outer ends only can cause kickback. As the material weakens it sags, closing down the kerf and pinching the blade.

English

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Guide Dutilisation Manual de instrucciones 4 184 mm Worm Drive Saw DWS535, DWS535TWork area safety Definitions Safety GuidelinesElectrical safety InjuryPower tool use and care Personal safetyService Safety Instructions for All SawsCauses and Operator Prevention of Kickback Lower Guard Safety Instructions Additional Safety InstructionsAWG Saw Hook Fig Components FigIntended USE Cutting Depth Adjustment , 4 Twist-lock Connector DWS535TBevel Angle Adjustment Kerf Indicator Fig Foot Plate Adjustment for 90˚ CutsTrigger Switch Fig OperationTo remove knockout To Install the Blade , 10To Replace the blade Fig Kickback BladesBlade Teeth ApplicationWorkpiece Support Fig Cutting Ripping Fig Pocket Cutting FigTo check oil Maintenance Cleaning LubricationAccessories Three Year Limited WarrantyYear free service DAY money back GuaranteeEnglish DWS535 et DWS535T, 184 mm 7-1/4 po Scies Circulaires à Vis Sans FinGraves Entraîner des blessures légères ou modérées Définitions lignes directrices en matière de sécuritéRisques de dommages matériels Sécurité du lieu de travailSécurité personnelle Utilisation et entretien d’un outil électrique Consignes de sécurité propres à toutes les sciesRéparation Français Consignes de sécurité relatives au protège-lame inférieur Consignes additionnelles de sécurité240V 120VPlus AWGUsage Prévu Utilisation Ultérieure Description FigConnecteur à verrouillage par rotation DWS535T Crochet de suspension FigRéglage de profondeur de coupe , 4 Avertissement pour réduireRéglage de la plaque d’assise pour des coupes à 90˚ Réglage de l’angle de chanfreinIndicateur de trait de scie Fig Réglage DE LA Scie Pour Effectuer UNE coupe en biseauGâchette Fig Changement de lameRetrait DE l’ALÉSAGE amovible Installation DE LA Lame , 10 Desserrer vers la gauche vers la droite Pour changer LA Lame FigRebonds LamesCarter DE Lame Inférieur LameSupport DE Pièce Inadéquat Configuration DE Profondeur DE Coupe IncorrecteTorsion DE LA Lame Mésalignement DE Coupe Matériaux Nécessitant UNE Attention SpécialeCoupe Support de pièce FigAvertissement il est important de sou Coupe longitudinale FIG Nettoyage EntretienCoupe interne fig Balais Fig LubrificationVérification DE l’huile Service D’ENTRETIEN Gratuit DE 1 AN AccessoiresRéparations Garantie limitée trois ansFrançais Sierra de 184 mm 7-1/4 pulg. con impulsor sinfín DWS535, DWS535T¡ADVERTENCIA! Lea todas las advertencias de seguridad Definiciones Normas de SeguridadSeguridad en el área de trabajo Seguridad eléctricaUso y mantenimiento de la herramienta eléctrica Seguridad personalMantenimiento Instrucciones de seguridad para todas las sierrasCausas del retroceso y su prevención por el operador Instrucciones de seguridad para el protector inferior Instrucciones adicionales de seguridadCalibre mínimo para juegos de cables Capacidad Componentes Fig Conector con cierre de torsión DWS535T Gancho de la sierra FigAjuste de la profundidad del corte , 4 USO DebidoAjuste de la plataforma para cortes a 90˚ Ajuste del ángulo del biselPara Ajustar LA Sierra Para UN Corte Biselado SI SE Necesita Ajuste AdicionalInterruptor de gatillo Fig Indicador de línea de corte FigPara Abrir EL Orificio PRE-HORADADO Para cambiar las hojasPara Instalar LA Hoja , 10 Español Para Cambiar LA Hoja FIG HojasProtector Inferior DE LA Hoja Hoja RetrocesoDientes Aplicación Soporte Inadecuado DE LA Pieza DE TrabajoAdvertencia Es importante el apoyar Apoyo de la pieza de trabajo FigCorte Cortes DE Orificios FIG Cortar a LO Largo DE LA Veta FIGLimpieza MantenimientoLubricación Para Comprobar EL AceiteAccesorios Escobillas FigPóliza de Garantía ReparacionesGarantía limitada por tres años ExcepcionesGarantía de reembolso de su dinero por 90 Días Año de servicio gratuitoCULIACAN, SIN GUADALAJARA, JALMONTERREY, N.L MERIDA, YUCPUEBLA, PUE QUERETARO, QRO
Related manuals
Manual 64 pages 58.4 Kb

DWS535 specifications

The DeWalt DWS535 is a powerful and versatile circular saw that is designed to meet the rigorous demands of professionals and DIY enthusiasts alike. Known for its solid construction and cutting-edge technology, the DWS535 showcases the brand's commitment to quality and innovation in woodworking tools.

One of the standout features of the DWS535 is its robust 15-amp motor, which delivers a remarkable no-load speed of 5,300 RPM. This ensures users can tackle a variety of cutting tasks with ease and confidence, whether working with lumber, engineered wood products, or other materials. The high-speed blade cuts through even the toughest materials quickly and efficiently, making it ideal for framing, decking, and general carpentry projects.

The DWS535 is equipped with a 7-1/4 inch carbide-tipped blade that enhances cutting accuracy and durability. The blade's design allows for smooth and clean cuts, reducing the need for post-processing. Additionally, the saw’s integrated electric brake stops the blade quickly after the trigger is released. This safety feature not only enhances user control but also minimizes the risk of accidental injuries, making it a safer choice for operators.

Comfort and usability are also central to the design of the DWS535. It features a lightweight, well-balanced construction that allows for easy maneuverability. Furthermore, the ergonomic handle is designed to reduce fatigue during extended use, providing better grip and control. The saw’s bevel capacity of 0° to 45° contributes to its versatility, enabling users to achieve angled cuts with precision.

Incorporating advanced technologies, the DWS535 features a built-in rafter hook that provides convenient storage and accessibility. Additionally, the saw is designed with a durable protective blade guard that enhances safety while allowing users to easily visualize their cutting line. The tool’s dust port is another thoughtful addition, helping to keep the workspace clean and free from debris, ultimately improving visibility for better accuracy.

Overall, the DeWalt DWS535 stands out in a crowded market of circular saws with its powerful performance, safety features, and user-friendly design. Whether you’re a seasoned professional or a weekend warrior, this tool is engineered to deliver efficiency, accuracy, and safety on every job site. With its remarkable combination of features, the DWS535 proves to be a wise investment for anyone serious about woodworking or construction.
Top Page Image Contents