Black & Decker BDCR20B Important charging notes, FUNCTIONAL DESCRIPTION Figure a

Page 6

WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit. NOTE: Lithium-Ion batteries should not be put in checked baggage.

Storage Recommendations

1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold.

2. Long storage will not harm the battery pack or charger.

important charging notes

1.Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 65°F and 75°F (18°- 24°C). DO NOT charge the battery pack in an air temperature below

+40°F (+4.5°C), or above +105°F (+40.5°C).

This is important and will prevent serious damage to the battery pack.

2.The charger and battery pack may become warm to touch while charging. This is a normal condition, and does not indicate a problem. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer.

3.If the battery pack does not charge properly:

a.Check current at receptacle by plugging in a lamp or other appliance.

b.Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.

c.Move charger and battery pack to a location where the surrounding air temperature is approximately 65°F - 75°F (18°- 24°C).

d.If charging problems persist, take the tool, battery pack and charger to your local service center.

4.The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure. You may also charge a partially used pack whenever you desire with no adverse affect on the battery pack.

5.Foreign materials of a conductive nature

such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean.

6. Do not freeze or immerse charger in water or any other liquid.

WARNING: Shock hazard. Do not allow any liquid to get inside charger.Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

FUNCTIONAL DESCRIPTION Figure A

1.On/Off Trigger

2. Lock-off button

3. Shoe

4. Blade clamp release lever

5. Blade

6. Battery (not included)

7. Battery release button (on battery)

8. Main Handle

9. Secondary Gripping Handle

These products use the batteries and chargers listed in the chart below.

Description

Catalog #

20v

Max** Lithium-Ion Battery:

LBXR20

20v

Max** Type 1 22wh Lithium-Ion Battery:

LB20

20v

Max** Lithium-Ion Battery Charger:

LCS20

Lithium 2 Amp Fast Charger:

L2AFC

Lithium 2 Amp Fast Charger:

L2AFCBST

20v

Max** Lithium-Ion Battery Charger:

LCS1620

Charging Procedure

Black+Decker chargers are designed to charge Black+Decker battery packs in 3-4 hours depending on the pack being charged. 1. Plug the charger into an appropriate outlet before inserting the battery pack.

2. Insert the battery pack into the charger as shown in figure B.

3. The green LED will flash indicating that the battery is being charged.

4. The completion of charge is indicated by the green LED remaining on continuously. The pack is fully charged and may be used at this time or left on the charger.

Leaving the battery in the charger

The charger and battery pack can be left connected with the green LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

Installation and Removal of the Battery Pack

To install battery pack: Insert battery pack into the tool until an audible click is heard (Figure C). Make sure battery pack is fully seated and fully latched into position.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 20v max* reciprocating saw Thank you for choosing Black+DeckerWork Area Safety  Electrical safetySave all warnings and instructions for future reference Specific Safety Rules Use power tools only withImportant Safety Instructions for Battery Chargers SymbolsImportant Safety Instruction for Battery Packs Read all InstructionsInstallation and Removal of the Battery Pack Charging ProcedureLeaving the battery in the charger Important charging notesPage Trigger Switch Accessories TroubleshootingMaintenance PROJECT TIPSRbrc Seal Service Information Limited Two-Year Home Use WarrantyLatin America This warranty Free warning labelScie alternative De 20 v max Sécurité du lieu de travail Consignes de sécurité particulières Utilisation et entretien du bloc-pilesAvertissement Conserver CES DirectivesAvertissement risque de Mise EN Garde risque deMise EN Garde dans Lire toutes les directives Recommandations en matière de rangementAvertissement pour un Avertissement ne jamaisPage Fonctionnement Avertissement toujours Procédure de chargeRemarques importantes pour le chargement DétenteCoupe de métaux figure Coupe à ras figure GCoupe du bois figure H Découpe en poche Bois seulement Figure JEntretien Problème Cause possible Solution possibleDépannage Maximiser la durée de vie duEntretien Le sceau RbrcPage Sierra alternativa De 20 v mÁx Pautas DE SEGURIDAD/DEFINICIONESSeguridad en el área de trabajo Seguridad eléctricaNormas específicas de seguridad Uso y mantenimiento de la herramienta eléctricaAdvertencia USE Siempre Advertencia Riesgo deLea todas las instrucciones Precaución Riesgo deAdvertencia Para un No incinere el paquete de bateríasRecomendaciones Con respecto al Almacenamiento Advertencia Peligro deAdvertencia Nunca intente Procedimiento de cargaPage Palanca de liberación de la abrazadera de la hoja Notas importantes sobre la cargaInstrucciones de operación Advertencia Peligro de corteCortes en metal Figura Corte al ras Figura GCortes en madera Figura H Cortes internos Madera solamente Figura JLubricación MantenimientoEl sello Rbrc Información de mantenimientoGarantía limitado de dos años para uso en el hogar América Latina esta garantía no Años limitado DE GarantiaAños DE Garantia Esta Garantia no Aplica CuandoFernando González Armenta Htas. Portátiles de ChihuahuaFerre Pat de Puebla, S.A. de C.V Perfiles y Herramientas de Morelia

BDCR20B specifications

The Black & Decker BDCR20B is a versatile and powerful cordless rechargeable drill that meets the needs of both DIY enthusiasts and professionals. One of its standout features is its 20V MAX lithium-ion battery, which provides a longer runtime and holds a charge four times longer than traditional NiCad batteries. This ensures that users can complete their projects without frequent interruptions for battery charging.

A notable characteristic of the BDCR20B is its compact design, making it easy to maneuver in tight spaces. Weighing only a few pounds, it is lightweight and easy to handle, reducing fatigue during extended use. Its ergonomic handle provides a comfortable grip, enabling users to maintain control and precision while working on various tasks.

Equipped with a built-in LED work light, the BDCR20B enhances visibility in low-light conditions. This feature is particularly beneficial for users who often find themselves working in dimly lit areas, ensuring that they can see their work clearly without straining their eyes. The drill also boasts a high-performance motor that delivers a speed of up to 650 RPM, allowing for efficient drilling and driving into a wide variety of materials, including wood, metal, and plastic.

Versatility is another key aspect of the BDCR20B, as it comes with a 0-gear chuck that enables quick and easy bit changes. Users can effortlessly switch between different drilling and fastening tasks, making it an ideal tool for a range of applications, from assembling furniture to hanging shelves. The drill's 11-position clutch provides precise control over torque, preventing overdriving and stripping of screws, which results in a more polished and professional finish.

In terms of construction, the BDCR20B is built to endure. Its rugged exterior and robust design make it a durable companion for even the most demanding projects. Furthermore, the drill's battery is compatible with other tools in the 20V MAX system, offering added convenience for users who own multiple Black & Decker tools.

In summary, the Black & Decker BDCR20B combines power, efficiency, and versatility in a compact design. With its long-lasting battery, high-performance motor, and user-friendly features, it is an excellent choice for anyone looking to enhance their toolkit with a reliable cordless drill. Whether tackling everyday tasks or engaging in more complex projects, the BDCR20B is equipped to handle the job with ease.
Top Page Image Contents