Bosch Power Tools ADS181BN, ADS181-101, ADS181BL, ADS181-102 manual Assembly, Inserting Bits

BM 2610034437 03-14_ADS181 3/27/14 12:08 PM Page 8

Assembly

Disconnect battery pack ! WARNING from tool before making

any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

INSERTING BITS

Move reverse switch lever to the center “OFF” position. Rotate the chuck sleeve counter- clockwise viewing from chuck end, and open chuck to approximate drill bit diameter. Insert a clean bit up to the drill bit flutes for small bits, or as far as it will go for large bits. Close chuck by rotating the chuck sleeve clockwise and securely tighten by hand (Fig. 2).

Do not use the power of the ! WARNING drill while grasping chuck

to loosen or tighten bit. Friction burn or hand injury is possible if attempting to grasp the spinning chuck.

FIG. 2 CHUCK SLEEVE

DRILL BIT

BIT HOLDER

SCREWDRIVER BIT

-8-