B. INPUT TEST
Press the service button to select the INPUT TEST item in the GAME TEST MENU screen, and press the test button. The following INPUT TEST screen appears.
Periodically test the input devices by using the screen.
INPUT TEST |
|
STEERING WHEEL | XXX |
GAS PEDAL | XXX |
BRAKE PEDAL | XXX |
GEAR POSITION | ON |
START BUTTON | OFF |
VIEW CHANGE BUTTON | OFF |
SERVICE SWITCH | OFF |
TEST SWITCH | OFF |
PRESS TEST AND SERVICE BUTTON TO EXIT
•Each of STEERING WHEEL, GAS PEDAL, and BRAKE PEDAL indicates an analog value. Make sure that the value can smoothly change as you operate the input device. If not smoothly, readjust the volume or replace it with a new one. (See Chapter 10 and 12.)
•GEAR POSITION indicates N, 1, 2, 3, or 4. Make sure that the value can change as you operate the
•Make sure that each of the rest of the input devices can change its indication from OFF to ON as you operate the device.
•After testing, press the test button and the service button simultaneously. The GAME TEST MENU screen reappears.
VIEW CHANGE BUTTON
STEERING WHEEL
START BUTTON
GEAR POSITION
BRAKE PEDAL
GAS PEDAL
FIG. 8. 3 b
43