1
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
Make sure that all of the adjusters are in contact with the floor. If they are not, the cabinet can move and cause an accident.
This product has 6 casters and 6 Adjusters. (FIG. 5. 3a) When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level.
1Transport the product to the installation position. Be sure to provide adequate space allowing the player to get on and off.
2Have all of the Adjusters make contact with the floor. Adjust the Adjuster's height by using a wrench so that the machine position is kept level.
3After making adjustment, fasten the Adjuster Nut upward and secure the height of Adjuster (FIG. 5. 3 b).
CASTER
ADJUSTER
FIG. 5. 3 a BOTTOM VIEW
ADJUSTER
CASTER
FASTEN UPWARD.
Approx.5mm
FIG. 5. 3 b ADJUSTER | ADJUSTER |
|
12