13. REPLACING THE FLUORESCENT LAMP, AND LAMPS
When performing work, be sure to turn power off. Working with power on can cause electric shock and short circuit hazards.
The Fluorescent Lamp, when it gets hot, can cause burn. Be very careful when replacing the Fluorescent Lamp.
Be sure to use lamps of the designated rating. Using lamps of undesignated rating can cause a fire or malfunctioning.
To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Performing work without using the step can cause violent falling down accidents.
Be careful when handling the plastic made parts. Failure to observe this may cause injury due to damage or fragments resulting from damage.
INSIDE THE BILLBOARD
Remove the billboard holder, slide up the billboard plate, and replace the fluorescent tube.
TRUSS SCREW (3) black
M4 X 8
BILLBOARD HOLDER
BILLBOARD PLATE
To slide.
FLUORESCENT LAMP
GLOW
FIG. 13 a
FIG. 13 b | When performing work, |
| prepare a step. |
67